What is EN 10305-1 E235 Carbon Steel Pipes & Tube?
EN 10305-1 E235 is one of the grades in this precision tube range. These components have exceptional dimensional tolerance and enhanced accuracy. The EN 10305-1 E235+c grade is designed to be delivered in the cold drawn condition to the buyer. They are available in schedules of SCH 10 to SCH 160 and XXS.
EN 10305-1 grade covers steel to produce precision piping grades. The EN 10305-1 Tube is designed with a chemical composition of carbon, silicon, manganese, phosphorus, and sulfur. This gives the EN 10305-1 Steel Tubes good strength and excellent tolerance to high temperatures and corrosive media in stress-induced environments. The EN 10305-1 Material is designed with a tensile strength between 340mpa up to 550mpa.
They can be elongated by 22% in the system. Steel Tube EN 10305-1 grade can be precisely shaped in
different sizes and dimensions to meet different project requirements. The versatile EN 10305-1 Pipe is
widely used in transmission shafts, fuel injection pipes, power steering systems, boiler equipment, heat
exchanger tubes, and so on.
The EN 10305-4 grade is designated with a letter E, making the precision tubes adhere to standards and tolerances that are suited for machining parts. EN 10305-4 Pipe is designed keeping in mind there is no room for error or mismatch to take place within the piping system. EN 10305-1 E235 is one of the grades in this precision tubes range. These components have exceptional dimensional tolerance and enhanced accuracy. The EN 10305-1 E235+c grade is designed to be delivered in the cold drawn condition to the buyer. They are available in schedules of SCH 10 to SCH 160 and XXS. The E235+n Pipe is required to be delivered in normalized conditions. These pipes possess tight tolerance and showcase better mechanical properties and hardness. The E235+c Carbon Steel Seamless Tubes are strong components designed by passing hot steel through an extruded metal. These tubes have excellent load-bearing capacity compared to other types of piping equipment in this grade. The modules of this grade produced in India are cheaper than other European countries due to the availability of abundant raw material and labour. Get in touch with us to get more information about the pricing and added information about the product.
|Standard||IS, GB, JIS, ASME, ASTM, AISI, EN, DIN Pipes|
|Seamless Pipes Sizes||4 to 219 milimeter Wall thk.: 0.5 to 20 milimeter|
|Welded Pipes Sizes||5.0 milimeter – 1219.2 milimeter|
|Seamless Tube Sizes||3.35 milimeter OD To 101.6 milimeter OD|
|Tubes Swg & Bwg||10, 12 , 16, 14, 18, 20 Swg.|
|EFW Pipes sizes||5.0 – 1219.2 milimeter|
|Pipes Schedule||SCH40,STD, SCH40S, SCH80, SCH60, XS, SCH5, SCH10S, SCH10, SCH20, SCH80, SCH30, SCH120, SCH160, SCH140, XXS|
|Welded Tube Size||6.35 OD To 152 milimeter OD|
|Length||Double , Single Random, Cut length Tube & Pipes|
|Finish||AP, Polished, BA, MF|
|Form||U’ bent or Round, Hollow,Hydraulic, ‘ Straight Pipes, LSAW, Boiler,Rectangular, Clad Pipes, Square Pipes Etc|
|Material Test Certificates (MTC)||Material Test Certificates (MTC) as per EN 10204 3.1, EN 10204/3.1B, and EN 10204 3.2, 100% Radiography Test Report,
Third Party Inspection Report, Raw Materials Certificate, Fumigation Certificates, Heat Treatment Charts,
|Application||Oil Pipes & Tube, Fluid Pipes & Tube, Gas Pipes & Tube, Boiler Pipes & Tube, Heat exchanger Tube|
|End||Beveled , Plain End, Treaded Pipes & Tube|
|Pipes types||CHEMICAL COMPOSITION (LADLE ANALYSIS)|
|C%||Si%||Mn%||P%||S%||Cr%||Mo%||V%||Inne%||Cr+ Mo+ Ni Max%||Al.%|
|Yield Strength||Tensile Strength||Elongation A5 min|
|MPa min||ksi min||MPa min||MPa min||ksi min||Percentage|
Cold Drawn EN 10305-1 E355 1.0580 Steel Tube
Cold drawn seamless steel tube DIN EN 10305-1
DIN EN 10305-1 s45c seamless cold drawn tubes
Cold drawn seamless steel tubes EN 10305-1, E235+N
EN 10305-1 DIN 1630 OD 14" Seamless cold drawn pipe
EN 10305-1 E215 E235 E255 E355 OD 2mm - 60mm Pipe
EN 10305-1 schedule 80 carbon seamless steel pipe
EN 10305-1 Seamless honed precision steel tube
EN 10305-1 Seamless precision steel tube
• Transmission shafts
• Fuel injection pipes
• Piston pins
• Ball cages
• Steering systems
• Tubes for power steering systems
• Tubes for drive shafts
New Zealand, Ukraine, Brazil, Azerbaijan, Angola, United Kingdom, Philippines, Oman, France, Algeria, Macau, Sri Lanka, Tibet, Norway, Mexico, Venezuela, Denmark, Russia, Bhutan, Estonia, Austria, Vietnam, Argentina, Turkey, Greece, Romania, Bahrain, Bangladesh, Afghanistan, Italy, Poland, Zimbabwe, Thailand, India, Kenya, Ecuador, Puerto Rico, Nepal, Malaysia, Bulgaria, Libya, Slovakia, Chile, Serbia, Australia, Poland, Iran, Costa Rica, Peru, South Korea, Iraq, Iran, Indonesia, Spain, Trinidad & Tobago,Tunisia, Qatar, Japan, Canada, Taiwan, Yemen, Mongolia, Czech Republic, Israel, Ghana, Egypt, Nigeria, Saudi Arabia, United Arab Emirates, Namibia, Hungary, South Africa, Hong Kong, Croatia, Colombia, Lebanon, Nigeria, Portugal, Finland, Pakistan, Jordan, Sweden, Belgium, Gambia, Lithuania, United States, Chile, Bolivia, Germany, Singapore, Ireland, Gabon, Kuwait, Switzerland, Mexico, Belarus, Kazakhstan, Morocco, China, Netherlands.
Kolkata, Madrid, Al Khobar, Sharjah, Perth, Haryana, Montreal, Navi Mumbai, Ranchi, Chiyoda, Toronto, Atyrau, Sydney, Petaling Jaya, Thiruvananthapuram, Bengaluru, Brisbane, Lagos, Tehran, Caracas, Melbourne, Ludhiana, Ahvaz, Algiers, Doha, Kuwait City, Istanbul, New Delhi, Aberdeen, Ankara, London, Howrah, Bogota, Ahmedabad, Noida, Singapore, Surat, Calgary, Cairo, Jaipur, Thane, Vung Tau, Port-of-Spain, Riyadh, Santiago, Hanoi, Colombo, Ernakulam, Mumbai, Jakarta, Dubai, Seoul, Karachi, Manama, Kuala Lumpur, Los Angeles, Chennai, Houston, Baroda, Geoje-si, Indore, Jamshedpur, Dammam, Ho Chi Minh City, Courbevoie, Vadodara, Lahore, Edmonton, Rio de Janeiro, Nashik, Muscat, Bangkok, Pune, Jeddah, Hong Kong, Visakhapatnam, Secunderabad, Dallas, Moscow, Gimhae-si, Milan, Ulsan, Coimbatore, Granada, Abu Dhabi, Kanpur, Faridabad, Busan, Mexico City, New York, Al Jubail, Gurgaon, Chandigarh, Nagpur, Rajkot, Pimpri-Chinchwad, Hyderabad, Bhopal, La Victoria.