Amardeep Steel is leading Copper Nickel 70/30 Pipe & Tube Supplier.
Copper-nickel alloys are among the best materials used by engineers. This is because the material has a lot of
amazing qualities. First, the material is very flexible, which makes it easy to make CUPRO NICKEL 70/30 PIPES
AND TUBES. The ASTM B466 Cupro Nickel 70/30 Seamless Pipe is also very good at moving heat. But if you compare
copper to the alloy, both the thermal conductivity and the electrical conductivity of the copper nickel 70/30
pipe go down.
Also, nickel in the alloy is known to make UNS C71500 Square Pipe more resistant to heat, especially if the
pipes are used in places with high temperatures. The Cu-Ni 70/30 Welded Pipe works well in marine engineering
for heat exchangers and condensers. It also works well in the refrigeration and air conditioning
industries.
Copper Nickel 70/30 Seamless Pipe and Tube are also a good addition to industries that need corrosion resistance because they are made of a very strong alloy and don't rust. Although, to be more specific, marine engineering is more likely to use a WERKSTOFF NR. 2.0882 Hexagonal Pipe. As an alloy, 70/30 Cu-Ni Hollow Pipe has a higher amount of copper, which makes it very resistant to seawater. Copper Nickel 70/30/NES 780 is resistant to microfouling because it has more copper in it than other materials. The microfouling properties of this alloy, on the other hand, tend to be lower than those of pure copper.
Material Specification | EN10216-5, ASTM A 312/A790/, ASME SA 312/ SA790 |
WT | 0.1millimeter to 60 millimeter |
Copper Nickel 70/30 Pipe Size standard | Schedule 40s, 10s, 160s, 80s, ½”- 6” Nominal Bore |
Surface Finish | Bright, Cold Finish, Pickling, Annealing, Polished or as per need |
Length Available |
10 to 12 meter Double Random Length 5 -7 meter Single Random Length |
Technology to Manufacture | Cold Formed/ Hot |
Copper Nickel 70/30 Pipe various types | Welded, Seamless, EFW, ERW |
Test Reports | PMI Test Reports, EN 10204 3.1, Mill Test Certificates, Mechanical Reports, Chemical Reports, Visual Inspection Reports, NABL Approved Lab Reports, Third Party Inspection, , Destructive and Non Destructive Test Reports |
Copper Nickel 70/30 Pipe Standard ASTM | AMS, EN, AISI, JIS, GOST, GB, ASME, ASTM, DIN |
Method | Hot Rolled/ Cold Rolled |
Copper Nickel 70/30 Pipe available Shapes | Square, Round, Box Section, Rectangle |
UNS C71500 Welded Pipes
ASTM B466 Cupro pipe
2.0882 Hexagonal Pipe
C71500 Square Pipe
70/30 Seamless Pipe/p>
Cu-Ni 70/30 Tube
Copper Nickel 70/30 Pipe Melting Point | Elongation | Density | Yield Strength | Tensile Strength |
2260 F | 30 % | at 68 F 0.323 lb/inch 3 | 20000 psi | 50000 psi |
Grade | Pb | Zn | Ni | Cu | Fe | Mn |
Copper Nickel 70/30 Pipe | .05 maximum | 1 maximum | 29 - 33 | 65.0 minimum | 0.4-1.0 | 1.0 maximum |
WERKSTOFF NR. | UNS | STANDARD |
2.0882 | C71500 | Cu-Ni 70/30 |
• Excellent corrosion and pitting resistance in marine environments
• Good strength and toughness
• Resistance to biofouling
• Readily weldable and fabricated
Offshore & marine | Salt water flanges, salt water piping and pipe fittings, valve bodies, sea water intakes,
pipe fittings, water boxes, propeller sleeves, pump bodies and parts
Chemical processing | Heat exchanger and cooling plant, evaporator tubes, distiller tubes, refrigerator and
condenser components
Other | Welding backing rings, flexible metal hose, weld wire and boiler parts
Kilogram/meter | Copper Nickel 70/30 Pipe Outside Diameter milimeter |
Schedule | Copper Nickel 70/30 Pipe Wall Thickness milimeter |
inch |
---|---|---|---|---|
0.050 | 13.72 | 10S | 01.65 | 1/4 |
0.081 | 13.72 | 80S | 3.02 | 1/4 |
01.12 | 17.15 | 80S | 3.20 | 3/8 |
01.30 | 26.67 | 10S | 2.11 | 3/4 |
01.65 | 201.34 | 80S | 3.73 | 1/2 |
2.23 | 26.67 | 80S | 3.91 | 3/4 |
01.29 | 201.34 | 40S | 2.77 | 1/2 |
01.71 | 26.67 | 40S | 2.87 | 3/4 |
0.086 | 17.15 | 40S | 2.31 | 3/8 |
0.064 | 13.72 | 40S | 2.24 | 1/4 |
2.13 | 33.40 | 10S | 2.77 | 1 |
0.064 | 17.15 | 10S | 01.65 | 3/8 |
2.73 | 42.16 | 10S | 2.77 | 1¼ |
4.30 | 33.40 | 160 | 6.352) | 1 |
3.29 | 33.40 | 80S | 4.55 | 1 |
3.44 | 42.16 | 40S | 3.56 | 1¼ |
2.54 | 33.40 | 40S | 3.38 | 1 |
4.53 | 42.16 | 80S | 4.85 | 1¼ |
01.02 | 201.34 | 10S | 2.11 | 1/2 |
3.16 | 48.26 | 10S | 2.77 | 1½ |
5.49 | 48.26 | 80S | 5.08 | 1½ |
4.11 | 48.26 | 40S | 3.68 | 1½ |
5.69 | 42.16 | 160 | 6.352) | 1¼ |
3.99 | 60.033 | 10S | 2.77 | 2 |
5.52 | 60.033 | 40S | 3.91 | 2 |
7.60 | 60.033 | 80S | 5.54 | 2 |
101.29 | 60.033 | 160 | 8.742) | 2 |
5.35 | 73.03 | 10S | 3.05 | 2½ |
8.77 | 73.03 | 40S | 5.16 | 2½ |
101.59 | 73.03 | 80S | 7.01 | 2½ |
6.56 | 88.90 | 10S | 3.05 | 3 |
201.67 | 88.90 | 160 | 101.132) | 3 |
15.51 | 88.90 | 80S | 7.62 | 3 |
13.78 | 1001.60 | 40S | 5.74 | 3½ |
7.53 | 1001.60 | 10S | 3.05 | 3½ |
18.92 | 1001.60 | 80S | 8.08 | 3½ |
16.32 | 114.30 | 40S | 6.02 | 4 |
101.47 | 88.90 | 40S | 5.49 | 3 |
8.50 | 114.30 | 10S | 3.05 | 4 |
22.10 | 1401.30 | 40S | 6.55 | 5 |
34.05 | 114.30 | 160 | 13.492) | 4 |
49.87 | 1401.30 | 160 | 15.882) | 5 |
112.97 | 219.08 | 160 | 23.012) | 8 |
28.69 | 168.28 | 40S | 7.11 | 6 |
22.67 | 114.30 | 80S | 8.56 | 4 |
14.04 | 168.28 | 10S | 3.4 | 6 |
54.75 | 168.28 | 120 | 14.27 | 6 |
43.21 | 168.28 | 80S | 10.097 | 6 |
301.44 | 1401.30 | 80S | 9.53 | 5 |
68.59 | 168.28 | 160 | 18.262) | 6 |
901.30 | 219.08 | 120 | 18.23 | 8 |
65.63 | 219.08 | 80S | 12.7 | 8 |
43.20 | 219.08 | 40S | 8.18 | 8 |
( Outside Diameter) Copper Nickel 70/30 Tube Sizes | WT |
---|---|
1/8" | 0.012 |
1/16" , 1/8" , 1/4" 3/16" , 3/8", 5/16" | 0.020 |
1/8" , 3/16" | 0.016 |
1/16" , 1/8" , 3/16" | 0.010 |
1/8" , 1/4" 3/16" , 3/8", 5/16" , 1/2" , 3/4" , 1" , 1 1/2" , 2" | 0.028 |
1/8" , 1/4" 3/16" , 3/8", 5/16" , 7/16" , 1/2" , 16" , 5/8" , 3/4" , 7/8" , 1" , 1 1/2" , 1 1/4" , 1 5/8" , 2" , 2 1/4" | 0.035 |
1/4" 3/16" , 3/8", 5/16" , 1/2" , 16" , 5/8" , 3/4" , 7/8" , 1" , 1 1/8" , 1 1/2" , 1 1/4" , 1 5/8" , 2" , 2 1/4" | 0.049 |
1/4" , 5/16" , 3/8" , 1/2" , 16" , 5/8" , 3/4" , 7/8" , 1" , 1 1/2" , 1 1/4" , 1 5/8" , 1 3/4" , 2" , 2 1/2" , 3" | 0.065 |
3 1/2" | .375 |
1/4" , 3/8" , 1/2" , 5/8" , 3/4" , 7/8" , 1" , 1 1/2" , 1 1/4" , 1 5/8" , 1 7/8" , 2" , 2 1/2" ,3" | 0.083 |
1/2" , 5/8" , 1 1/4" , 1" , 1 1/2" , 2" | 0.095 |
1/2" , 3/4" , 1 1/4" , 1" , 1 1/2" , 2" | .109 |
1/2" , 5/8" , 3/4" , 7/8" , 1 1/4" , 1" , 1 1/2" , 2" , 2 1/4" , 2 1/2" , 3" | .120 |
3" | .250 |
3/4" , 1 1/4" , 1" , 1 1/2" , 2" , 3" , 3 1/4" | .125 |
1" | .134 |
Pipes O.D. (in.) |
Copper Nickel 70/30 Pipe Wall Thickness of Pipe (inches) | |||||||
---|---|---|---|---|---|---|---|---|
.035 | .109 | .028 | .065 | .049 | .095 | .083 | .120 | |
1/4 | 4800 | 3700 | 9500 | 7000 | ||||
1/8 | 10100 | 7900 | ||||||
3/8 | 3100 | 6100 | 4400 | |||||
5/16 | 3700 | 7300 | 5400 | |||||
3/4 | 3000 | 2200 | 4600 | 4000 | ||||
1/2 | 2300 | 4400 | 3200 | |||||
1 | 3900 | 2200 | 3400 | 2900 | 4300 |
Nominal Pipe Size | WT | Copper Nickel 70/30 Pipe OD | Weight | Copper Nickel 70/30 Pipe Weight | |||
milimeter | inch | inch | milimeter | kilogram/Meter | Sched | Lb/ft | |
1/2″ | 2.769 | 0.0109 | 0.0840 | 21 | 1.268 | 40 STD | 0.0851 |
3.734 | 0.0147 | 1.621 | 80 STD | 1.088 | |||
3/4″ | 2.870 | 0.0113 | 1.050 | 27 | 1.684 | 40 STD | 1.131 |
3.912 | 0.0154 | 2.195 | 80 STD | 1.474 | |||
1″ | 3.378 | 0.0133 | 1.315 | 33 | 2.501 | 40 STD | 1.679 |
4.547 | 0.0179 | 3.325 | 80 STD | 2.172 | |||
1 1/4″ | 3.556 | 0.0140 | 1.660 | 42 | 3.385 | 40 STD | 2.273 |
4.851 | 0.0191 | 4.464 | 80 STD | 2.997 | |||
1 1/2″ | 3.683 | 0.0145 | 1.900 | 48 | 4.048 | 40 STD | 2.718 |
5.080 | 0.0200 | 5.409 | 80 STD | 3.361 | |||
2″ | 3.912 | 0.0154 | 2.375 | 60 | 5.441 | 40 STD | 3.653 |
5.537 | 0.0218 | 7.480 | 80 STD | 5.022 | |||
2 1/2″ | 5.516 | 0.0203 | 2.875 | 73 | 8.629 | 40 STD | 5.793 |
7.010 | 0.0276 | 11.411 | 80 STD | 7.661 | |||
3″ | 5.486 | 0.0216 | 3.500 | 89 | 11.284 | 40 STD | 7.576 |
7.620 | 0.0300 | 15.272 | 80 STD | 10.0253 | |||
4″ | 6.020 | 0.0237 | 4.500 | 114 | 16.073 | 10.0790 | |
8.560 | 0.0337 | 22.318 | 14.983 | ||||
6″ | 4.775 | 0.0188 | 6.625 | 168 | 19.252 | 12.924 | |
5.516 | 0.0203 | 20.0739 | 13.923 | ||||
5.563 | 0.0219 | 22.318 | 14.983 | ||||
6.350 | 0.0250 | 25.354 | 17.021 | ||||
7.112 | 0.0280 | 58.263 | 40 STD | 18.974 | |||
7.925 | 0.0312 | 31.334 | 21.036 | ||||
9.525 | 0.0375 | 37.285 | 25.031 | ||||
10.0973 | 0.0432 | 42.561 | 80 XHY | 28.573 | |||
12.700 | 0.0500 | 48.719 | 32.708 | ||||
8″ | 4.775 | 0.0188 | 8.625 | 219 | 25.233 | 16.940 | |
5.156 | 0.0203 | 27.198 | 18.259 | ||||
5.563 | 0.0219 | 29.286 | 19.661 | ||||
6.350 | 0.0250 | 33.308 | 20 | 22.361 | |||
7.036 | 0.0277 | 36.786 | 30 | 24.696 | |||
8.179 | 0.0322 | 42.352 | 40 | 28.554 | |||
9.525 | 0.0375 | 49.216 | 33.041 | ||||
10.0312 | 0.0406 | 53.085 | 60 | 35.638 | |||
12.700 | 0.0500 | 64.627 | 80 XHY | 43.388 | |||
10″ | 4.775 | 0.0188 | 10.0750 | 273 | 31.588 | 21.207 | |
5.563 | 0.0219 | 36.689 | 24.631 | ||||
6.350 | 0.0250 | 41.759 | 20 | 28.035 | |||
7.798 | 0.0307 | 51.002 | 30 | 34.240 | |||
8.738 | 0.0344 | 56.946 | 38.231 | ||||
9.271 | 0.0365 | 63.301 | 40 STD | 40.0483 | |||
11.125 | 0.0438 | 71.852 | 48.238 | ||||
12.700 | 0.0500 | 81.530 | 60 XHY | 54.735 | |||
15.088 | 0.0594 | 95.969 | 80 | 64.429 | |||
12″ | 4.775 | 0.0188 | 12.750 | 324 | 37.570 | 25.222 | |
5.563 | 0.0219 | 43.657 | 29.309 | ||||
6.350 | 0.0250 | 49.713 | 33.375 | ||||
7.137 | 0.0281 | 55.739 | 37.420 | ||||
7.925 | 0.0312 | 61.735 | 41.445 | ||||
9.525 | 0.0375 | 73.824 | 49.562 | ||||
10.0312 | 0.0406 | 79.727 | 53.525 | ||||
12.700 | 0.0500 | 97.438 | 65.415 | ||||
14.275 | 0.0562 | 108.966 | 73.154 | ||||
14″ | 4.775 | 0.0188 | 14.000 | 356 | 41.308 | 27.732 | |
5.563 | 0.0219 | 48.012 | 32.233 | ||||
6.350 | 0.0250 | 54.685 | 20 | 36.713 | |||
7.137 | 0.0281 | 61.327 | 41.172 | ||||
7.925 | 0.0312 | 67.939 | 45.611 | ||||
9.525 | 0.0375 | 81.281 | STD | 54.568 | |||
11.125 | 0.0438 | 94.498 | 40 | 63.441 | |||
12.700 | 0.0500 | 107.381 | XHY | 72.090 | |||
15.875 | 0.0625 | 132.983 | 89.278 | ||||
16” | 4.775 | 0.0188 | 16.000 | 406 | 47.290 | 21.748 | |
5.563 | 0.0219 | 54.980 | 36.910 | ||||
6.350 | 0.0250 | 62.639 | 10 | 42.053 | |||
7.137 | 0.0281 | 70.0268 | 47.174 | ||||
7.925 | 0.0312 | 77.866 | 20 | 52.275 | |||
8.738 | 0.0344 | 85.677 | 57.519 | ||||
9.525 | 0.0375 | 93.213 |
30 STD |
62.578 | |||
11.125 | 0.0438 | 108.433 | 72.797 | ||||
12.700 | 0.0500 | 123.289 |
40 XHY |
82.770 | |||
18″ | 5.563 | 0.0219 | 18.000 | 457 | 61.948 | 41.588 | |
6.350 | 0.0250 | 70.0593 | 47.393 | ||||
7.137 | 0.0281 | 79.208 | 53.176 | ||||
7.925 | 0.0312 | 87.792 | 20 | 58.939 | |||
9.525 | 0.0375 | 105.144 | STD | 70.0588 | |||
11.125 | 0.0438 | 122.369 | 30 | 82.152 | |||
12.700 | 0.0500 | 139.198 | XHY | 93.450 | |||
14.275 | 0.0562 | 155.904 | 40 | 104.666 | |||
15.875 | 0.0625 | 172.754 | 115.978 | ||||
20″ | 6.350 | 0.0250 | 20.0000 | 508 | 78.547 | 52.733 | |
7.163 | 0.0282 | 88.458 | 59.386 | ||||
7.925 | 0.0312 | 97.719 | 65.604 | ||||
9.525 | 0.0375 | 117.075 | 20 STD | 78.598 | |||
11.125 | 0.0438 | 136.305 | 91.508 | ||||
12.700 | 0.0500 | 155.106 | 30 XHY | 104.130 | |||
15.088 | 0.0594 | 183.378 | 40 | 123.110 | |||
15.875 | 0.0625 | 192.640 | 129.328 | ||||
17.475 | 0.0688 | 211.368 | 141.901 | ||||
24″ | 6.350 | 0.0250 | 24.000 | 610 | 94.456 | 63.413 | |
7.137 | 0.0281 | 106.029 | 71.183 | ||||
7.925 | 0.0312 | 117.573 | 18.932 | ||||
9.525 | 0.0375 | 140.0938 | 20 STD | 64.618 | |||
11.125 | 0.0438 | 164.176 | 110.0219 | ||||
12.700 | 0.0500 | 186.923 | XHY | 125.490 | |||
15.875 | 0.0625 | 232.410 | 156.028 | ||||
17.475 | 0.0688 | 255.148 | 40 | 171.293 | |||
19.050 | 0.0750 | 277.401 | 186.233 | ||||
30″ | 6.350 | 0.0250 | 30.0000 | 762 | 118.318 | 79.433 | |
7.137 | 0.0281 | 132.851 | 89.189 | ||||
7.925 | 0.0312 | 147.353 | 10 | 98.925 | |||
9.525 | 0.0375 | 176.731 | STD | 118.648 | |||
11.125 | 0.0438 | 205.983 | 138.286 | ||||
12.700 | 0.0500 | 234.647 | 20 XHY | 157.530 | |||
15.875 | 0.0625 | 292.066 | 30 | 196.078 | |||
17.475 | 0.0688 | 320.0817 | 215.380 | ||||
19.050 | 0.0750 | 348.988 | 234.293 | ||||
36″ | 6.350 | 0.0250 | 36.000 | 914 | 142.180 | 95.453 | |
7.137 | 0.0281 | 159.672 | 107.196 | ||||
7.925 | 0.0312 | 177.133 | 10 | 118.918 | |||
9.525 | 0.0375 | 215.525 | STD | 142.678 | |||
11.125 | 0.0438 | 247.790 | 166.353 | ||||
12.700 | 0.0500 | 282.372 | 20 XHY | 198.570 | |||
15.875 | 0.0625 | 351.723 | 236.128 | ||||
17.475 | 0.0688 | 386.487 | 259.467 | ||||
19.050 | 0.0750 | 420.0576 | 282.353 | ||||
42″ | 7.925 | 0.0312 | 42.000 | 1067 | 206.914 | 138.911 | |
9.525 | 0.0375 | 248.319 | STD | 166.708 | |||
12.700 | 0.0500 | 33.097 | XHY | 221.610 | |||
19.050 | 0.0750 | 492.163 | 330.0413 | ||||
48″ | 9.525 | 0.0375 | 48.000 | 1219 | 284.112 | STD | 190.0738 |
11.125 | 0.0438 | 331.404 | 222.487 | ||||
12.700 | 0.0500 | 377.822 | XHY | 253.650 | |||
19.050 | 0.0750 | 563.750 | 378.473 | ||||
22.225 | 0.0875 | 655.969 | 440.0383 |
1/8" IPS(.405"O. D.) | 3 1/2" IPS( 4.000"O. D.) |
---|---|
SCH 40, 80 | SCH 10, 40, 80, 160, XXH |
1/4" IPS(.540"O. D.) | 4" IPS(4.500"O. D.) |
SCH 10, 40, 80 | SCH 10, 40, 80, 160, XXH |
3/8" IPS(.675"O. D.) | 5" IPS( 5.563"O. D.) |
SCH 10, 40, 80 | SCH 10, 40, 80, 160, XXH |
1/2" IPS(.840"O. D.) | 6" IPS(6.625"O. D.) |
SCH 5, 10, 40, 80, 160, XXH | SCH 5, 10, 40, 80, 120, 160, XXH |
3/4" IPS(1.050"O. D.) | 8 ” IPS(8.625"O. D.) |
SCH 10, 40, 80, 160, XXH | SCH 5, 10, 40, 80, 120, 160, XXH |
1" IPS:(1.315′O. D.) | 10" IPS(10.750"O. D.) |
SCH 5, 10, 40, 80, 160, XXH | SCH 10, 20, 40, 80 (.500), TRUE 80(.500) |
1-1/4" IPS(1.660"O. D.) | 12" IPS(12.750"O. D.) |
SCH 10, 40, 80, 160, XXH | SCH 10, 20, 40(.375), TRUE40(.406), SCH80(.500) |
1-1/2" IPS(1.900"O. D.) | 14" IPS(14.000"O. D.) |
SCH 10, 40, 80, 160, XXH | SCH10 (.188), SCH40 (.375) |
2" IPS(2.375"O. D.) | 16" IPS(16.000"O. D.) |
SCH 10, 40, 80, 160, XXH | SCH10(.188), SCH40(.375) |
2 1/2" IPS(2.875"O. D.) | 18" IPS (18.000"O. D.) |
SCH 10, 40, 80, 160, XXH | SCH-40 (.375) |
3" IPS( 3.500"O. D.) | |
SCH 5, 10, 40, 80, 160, XXH |
Copper Nickel 70/30 Pipe Surface Finish | Exterbal Surface(OD) | Internal Surface(ID) | |||
Roughness Average(RA) | Roughness Average(RA) | ||||
μm | μ inch | μm | μ inch | ||
BA | Beight Annealed | 0.8 | 32 | 1.0, 0.6, 0.8, 0.5 | 32, 40, 20, 25 |
EP | Electro Polish | 0.8 | 32 | 0.25, 0.38, 0.13, 0.20 | 10, 7, 15,5 |
AP | Annealed & Pickled | 1.0 or Not defined | 40 or Not defined | Not defined | Not defined |
MP | Mechanical Polish | 0.8 | 32 | 0.8, 1.0, 0.5, 0.6 | 32, 40, 20, 25 |
Copper Nickel 70/30 Pipe Types | Copper Nickel 70/30 Pipe Out diameter | Wall thickness | Copper Nickel 70/30 Pipe Length |
---|---|---|---|
Copper Nickel 70/30 Seamless Pipe (as per need) | 5.0 milimeter ~ 203.2 milimeter | as per need | Upto 6 Meters |
NB Sizes (ready Stock) | 1/8” ~ 8” | SCH 10 / SCH 5 / SCH 80 //SCH 40 / SCH 160 | |
Cupro Nickel 70/30 Welded Pipe (ready Stock + as per need | 5.0 milimeter ~ 1219.2 milimeter | 1.0 ~ 15.0 milimeter |
Mexico, Afghanistan, Italy, Switzerland, Czech Republic, Algeria, Angola, Brazil, Poland, Colombia, Slovakia, Trinidad & Tobago,Tunisia, Chile, Bahrain, Iran, Indonesia, Libya, Croatia, Austria, Norway, Estonia, Belarus, Philippines, Mexico, China, Hungary, Iraq, Jordan, Bolivia, South Africa, Australia, Chile, Israel, Bhutan, Hong Kong, Germany, Poland, Kazakhstan, Spain, Macau, Pakistan, Sri Lanka, Lebanon, Namibia, Sweden, Qatar, Kuwait, Canada, Gambia, Greece, Ukraine, United Arab Emirates, Puerto Rico, Turkey, New Zealand, Oman, Netherlands, Venezuela, Finland, Argentina, United Kingdom, Yemen, Nigeria, Nigeria, Portugal, India, South Korea, Tibet, Malaysia, Peru, Russia, Denmark, Ghana, Singapore, Bulgaria, Iran, Morocco, Ecuador, Gabon, Costa Rica, Azerbaijan, United States, Taiwan, Belgium, Lithuania, Thailand, Bangladesh, Japan, Egypt, Saudi Arabia, Mongolia, Romania, France, Serbia, Ireland, Nepal, Vietnam, Kenya, Zimbabwe.
Brisbane, Indore, Navi Mumbai, New York, Haryana, Gimhae-si, Los Angeles, Moscow, Milan, Nagpur, La Victoria, Baroda, Tehran, Atyrau, Kolkata, Granada, Coimbatore, Port-of-Spain, Abu Dhabi, Nashik, Algiers, Gurgaon, London, Courbevoie, Surat, Al Jubail, Lagos, Hyderabad, Muscat, Madrid, Noida, Howrah, Mumbai, Ernakulam, Secunderabad, Riyadh, Jaipur, Thiruvananthapuram, Jeddah, Ludhiana, Mexico City, Ahvaz, Aberdeen, Dammam, Dubai, Visakhapatnam, Busan, Petaling Jaya, Al Khobar, Karachi, Kuwait City, Sydney, Vung Tau, Rajkot, Ahmedabad, Caracas, Bhopal, Thane, Sharjah, Pimpri-Chinchwad, Chennai, Pune, Bogota, Seoul, Montreal, Faridabad, Istanbul, Houston, Hong Kong, Jamshedpur, Jakarta, Ulsan, Bangkok, Singapore, Manama, Melbourne, Edmonton, Rio de Janeiro, Colombo, Dallas, Ankara, Chiyoda, Vadodara, Lahore, Kuala Lumpur, Geoje-si, Chandigarh, Calgary, Doha, Hanoi, Santiago, Bengaluru, Ho Chi Minh City, Cairo, New Delhi, Perth, Ranchi, Toronto, Kanpur.