Carbon Steel ASTM A513 1026 Tubes

ASTM A513 1026 Tubing Suppliers, ASTM A513 1026 Pipe Manufacturers In India, Astm A513 Steel tubes Manufacturers In India, Astm A513 1026 Pipe Suppliers, Astm A513 1026 Pipe Manufacturers, A513 1026 Pipe Manufacturers, A513 1026 Pipe Suppliers in India, prices of ASTM a513 1026 tube.

ASTM A513 1026 Tubing, ASTM A513 Grade 1026 Tubing Suppliers In India, ASTM A513 Square & Rectangle Tubing, ASTM A513 1026 Round Tubing, ASTM A513 1026 Pipe, ASME SA513 1026 Pipe, ASTM a513 1026 pipe, ASTM a513 1026 rectangular tubing, ASTM a513 1026 pipe, astm a513 1026, astm a513 1026, astm a513 1026 pipe, astm a513 1026 tube in India.

Amardeep Steel Center is one of the prominent manufacturers, stockist, Supplier, and Exporter of Carbon Steel ASTM A513 1026 Tube that is being created and planned as per global quality guidelines. Our ASTM A513 1026 Tube Carbon Steel Pipe & Tubes go through hardness test, flattening test, flaring test, flange test, and hydrostatic test Before They Are Stocked and Supplied To Our Clients. ASTM A513 1026 Tubes Are Thermal Resistant and Corrosion Resistant In Nature Making Theme Resistant To Tough Weather Conditions. They Are Also Medium – Carbon Seamless Tubes which are utilized in heater tubes and evaporator vent Tubes, they have least divider thickness. ASTM A513 1026 Tubes are reasonable for an exceptionally wide scope of uses like slurry, sewage, paper, synthetic, water supply, farming, sloppy water, slurry, paper stock, gooey fluid, and Clearwater. This ASTM A513 1026 Seamless Tubes Insulation is harshly reviewed by the best quality investigators to convey a deformity unfenced to the customers.

Other than containing carbon as their particular component, carbon steel grade AISI 1026 contains a huge substance of both silicon and manganese. To be precise, the NOM B-203 Grade 1026 mechanical lines contain around 0.4% silicon and 1.2% manganese. There are a few determinations covered via carbon steel grade SAE 1026 Tubing including ASTM A29, ASTM A510, ASTM A512 just as ASTM A513. The ASTM A29 Grade 1026 Boiler Pipes encompass both cold-completed and hot-moved parts. Under ASTM A29, the lines are needed to be exposed to both Heat and item investigation alongside grain size and mechanical tests.

ASTM A513, then again, covers electric obstruction welded or ERW, mechanical cylinders in different structures like square, rectangular, round, or some other specially formed part. There are six sorts of ASTM A513 Grade 1026 cold-drawn consistent steel tubes shrouded in this particular, alongside the exhibition of a hotness and item examination, without the presence of any damaging deformities. Also, this specific AISI 1026 Pipe needs to have a workmanlike completion and whenever required, they are to be coated with a layer of rust hindering oil prior to being transported. The ASTM A513 Grade 1026 Seamless steel tube is produced with a particular breaking point concerning the substance of carbon and different components in its combination. While, the ASTM A513 Grade 1026 carbon steel pipe created under determination ASTM A512, obliges the utilization of an uncommon softening interaction to make cold-drawn items like the buttweld carbon steel pipes. The carbon-manganese-based AS 1443 Grade K1026 Seamless Tubing is specific as far as its preparation by chilly wrapping up.

SAE 1026 Tubing specification chart :
AS 1443 Grade K1026 Composition Standard :

Grade C Mn P≤ S≤
1026 0.22-0.28 0.60-0.90 0.040 0.050

Mechanical Behaviour of NOM B-203 Grade 1026:

Cut to length AS 1443 Grade K1026 Seamless Tubing from ready stock

Properties Metric Imperial
Tensile strength 490 MPa 71100 psi
Yield strength 415 MPa 60200 psi
Bulk modulus (typical for steel) 140 GPa 20300 ksi
Shear modulus (typical for steel) 80.0 GPa 11600 ksi
Elastic modulus 190-210 GPa 27557-30458 ksi
Poisson’s ratio 0.27-0.30 0.27-0.30
Elongation at break (In 50 mm) 15.00% 15.00%
Reduction of area 40.00% 40.00%
Hardness, Brinell 143 143
Hardness, Knoop (converted from Brinell hardness) 163 163
Hardness, Rockwell B (converted from Brinell hardness) 78 78
Hardness, Vickers (converted from Brinell hardness) 149 149

ASTM A512 Grade 1026 Dimensions:

Outside Diameter Tolerances for Round Hot-Finished Tubing A, B, C
Outside Diameter Size Range, In.(mm) Outside Diameter Tolerance, in. (mm)
Over (+) Under (-)
up to 2.999 (76.17) 0.020 (0.51) 0.020 (0.51)
3.000-4.499 (76.20-114.27) 0.025 (0.64) 0.025 (0.64)
4.500–5.999 (114.30–152.37) 0.031 (0.79) 0.031 (0.79)
6.000–7.499 (152.40–190.47) 0.037 (0.94) 0.037 (0.94)
7.500–8.999 (190.50–228.57) 0.045 (1.14) 0.045 (1.14)
9.000–10.750 (228.60–273.05) 0.050 (1.27) 0.050 (1.27)
A. Diameter tolerance is not applicable to normalized and tempered or quenched and tempered conditions.
B. The common range of sizes of hot-finished tubes is 11⁄2 in. (38.1 mm) to 103⁄4 in. (273.0 mm) outside diameter with wall thickness at least 3 % or more of outside diameter, but not less than 0.095 in. (2.41 mm).
C. Larger sizes are available, consult the manufacturer for sizes and tolerances.

UNS Grade G10260 Tube Size Schedule Chart
SAE J412 Grade 1026 Thermal Treatments
Different UNS Grade G10260 Tube Types

Our Products

Our Main Market