ASTM A513 1010 Tubes & Pipes Manufacturer, Supplier & Exporter in India
Amardeep Steel Center is one of the conspicuous producers, stockists, traders, suppliers, and exporters of Carbon Steel A513 1010 Tube that is being created and planned as per global quality principles. A513 1010 Carbon Steel Tubes go through hardness test, flattening test, flaring test, flange test, and hydrostatic before they are stocked and supplied to our clients. A513 1010 Tubes are thermal resistant and corrosion resistant in nature making them resistant to tough weather conditions.
They are also medium – Carbon Seamless Tubes which are utilized in evaporator tubes and heater vent Tubes, they have least divider thickness.
ASME SA 513 Grade MT 1010 detail covers a few grades of carbon and compound steel consistent mechanical tubing. When welding is utilized for joining the weldable mechanical cylinder grades, the welding strategy will be appropriate for the grade, the state of the parts, and the planned help. Suggested pipe size will be created by Amardeep Steel endless supply of your request. A print or sketch of the part to be delivered ought to be incorporated. Grade, synthetic examination, and surface condition are painstakingly thought of, and creation measures are custom-made to accomplish the best tubing for the end-client.
We are considered as the most Reliable ASME SA 513 Grade MT 1010 Tubings Supplier from India.
ASME SA 513 Grade MT 1010 Carbon Steel Seamless Tubings stockist in Mumbai, India. Amardeep Steel Center stocks a total scope of IBR Certified ASME SA 513 Grade MT 1010 Carbon Steel Seamless Tubings in external measurement tube sizes ½"- 24" and Nominal bore NB sizes 15NB-600NB in Mumbai, India.
What Are ASTM A513 1010 Tubes & Pipes?
ASTM A513 1010 Tubes & Pipes refer to Electric-Resistance-Welded (ERW) carbon steel mechanical tubing manufactured to the ASTM A513 specification, specifically using Grade 1010 carbon steel. Grade 1010 is a low-carbon steel known for its excellent cold formability, weldability, and moderate strength. The ASTM A513 standard covers various types of welded carbon and alloy steel tubing for mechanical and structural uses.
This 1010 mechanical tubing is produced by forming flat-rolled steel strip into a tubular shape and then welding the longitudinal seam using an electric resistance welding process. The resulting ERW steel tubing 1010 offers good dimensional accuracy, a consistent surface finish, and is a cost-effective solution for numerous applications where high internal pressure containment is not the primary requirement (as opposed to pressure piping). ASTM A513 Grade 1010 is particularly favored for applications requiring significant bending, flaring, or other forming operations.
ASTM A513 1010 Tube & Pipe Specifications
Amardeep Steel supplies ASTM A513 1010 Tubes & Pipes conforming to industry standards and customer requirements.
| Specification Attribute | Details for ASTM A513 1010 Tubes & Pipes |
|---|---|
| Primary Standard | ASTM A513 / A513M - Standard Specification for Electric-Resistance-Welded Carbon and Alloy Steel Mechanical Tubing. (Also reference ASME SA513 1010 where equivalent) |
| Type & Grade | Type 1 (Hot-Rolled Strip, Cold-Rolled Strip), Type 5 (Mandrel Drawn), Type 6 (Special Smooth ID). Grade 1010. Type 1A & 1B are common. |
| UNS Designation | UNS G10100 |
| Manufacturing Process | Electric-Resistance-Welded (ERW) |
| Outer Diameter (OD) | Wide range available, typically from 1/2” (12.7mm) up to 12” (304.8mm) or more, depending on type and capabilities. |
| Wall Thickness (WT) | Various gauges and wall thicknesses available, typically from 0.028” (0.71mm) up to 0.500” (12.7mm) or more. |
| Shapes | Round, Square, Rectangular, Oval, and other special shapes as per ASTM A513. |
| Length | Standard mill lengths (e.g., 20 ft, 24 ft) and custom cut-to-length services. |
| Heat Treatment | Typically supplied in the as-welded or normalized condition. Stress relief annealing or other heat treatments may be applied if required for specific properties. |
| Testing & Certification | Dimensional checks, mechanical tests (tensile, flattening, flaring as per A513), chemical analysis. Mill Test Certificate (MTC) typically provided upon request. |
Chemical Properties of ASTM A513 Grade 1010 Tubes
| Carbon | Silicon | Manganese | Phosphorous | Sulphur | Molybdenum | Nickel | Chromium | Copper | Others |
|---|---|---|---|---|---|---|---|---|---|
| 0.05-0.15 | - | 0.30-0.60 | 0.04 | 0.05 | - | - | - | - | - |
Mechanical Properties of ASTM A513 Grade 1010 Tubing
Mechanical properties can vary based on the specific type within A513 (e.g., Type 1A, 1B, Type 2) and any subsequent cold work or heat treatment. Typical values for As-Welded Type 1 Grade 1010:
| Property | Value (Approximate) |
|---|---|
| Tensile Strength | 45,000 – 55,000 psi (310 – 380 MPa) |
| Yield Strength | 30,000 – 40,000 psi (205 – 275 MPa) |
| Elongation in 2″ | Typically 15–25% or higher (condition-dependent) |
| Hardness | Rockwell B 55–75 (typical range) |
Equivalent Grades of ASTM A513 Grade 1010 Seamless Tubes
| DIN | EN | BS | NFA | ASTM | ASME |
|---|---|---|---|---|---|
| DIN 17210 Grade Ck10 | EN C10E Grade 10084 | - | ASTM A513 Grade MT1010 | ASME SA 513 Grade MT 1010 | UNI C 10 |
Manufacturing Process & Quality Assurance for A513 1010 Pipes
Manufacturing of ERW Steel Tubing 1010:
- Slitting: High-quality hot-rolled or cold-rolled carbon steel strip (Grade 1010 / UNS G10100) is slit to the required width.
- Forming: The strip is progressively cold-formed through a series of rollers into a round tubular shape.
- Welding: The edges of the formed strip are joined using Electric Resistance Welding (ERW), where high-frequency electrical current heats the edges to a forging temperature, and pressure is applied to create a strong, homogenous weld seam.
- Sizing & Shaping: The welded tube passes through sizing rolls to achieve the final outside diameter and shape (round, square, rectangular).
- Cutting & Finishing: Tubes are cut to length. Further operations like deburring, heat treatment (if required), and surface finishing may be performed.
Quality Assurance of ASTM A513 1010 Tubes:
Amardeep Steel is committed to quality. Our ASTM A513 1010 Tubes undergo various checks including dimensional verification, visual inspection, and mechanical testing as per the ASTM A513 standard (and ASME SA513 1010 where applicable) to ensure they meet customer expectations.
Applications of ASTM A513 1010 Mechanical Tubing
The excellent formability and cost-effectiveness of Carbon steel mechanical tubing 1010 make it a popular choice for a wide variety of applications:
- Automotive Components: Seat frames, steering columns, chassis components, exhaust system parts (non-critical).
- Furniture Manufacturing: Frames for chairs, tables, desks, and other structural elements.
- Agricultural Equipment: Frames, supports, and components for machinery.
- Recreational Equipment: Bicycle frames, exercise equipment, playground structures.
- Industrial Machinery: Rollers, conveyor components, machine guards, support structures.
- Construction & Architectural: Railings, support posts, display stands, framework (often for non-load-bearing or moderately loaded structures).
- Material Handling Equipment: Carts, racks, shelving units.
- General Fabrication & DIY Projects.
Why Choose Amardeep Steel for Your ASTM A513 1010 Tubes & Pipes?
Amardeep Steel is your reliable Manufacturer, Supplier, and Exporter of ASTM A513 1010 Tubes & Pipes, including those meeting ASME SA513 1010 and UNS G10100 standards, in India and for the global market:
- Quality Commitment: We adhere to stringent quality control measures to ensure our ASTM A513 Grade 1010 tubing meets required standards.
- Wide Range of Sizes & Shapes: We offer A513 1010 tubing in round, square, rectangular, and other profiles to suit diverse mechanical needs.
- Competitive Pricing: We provide an excellent Price for high-quality ERW steel tubing 1010, offering great value for your projects.
- Customization Capabilities: We can provide cut-to-length services and cater to specific finishing requirements.
- Global Export Experience: Efficient logistics and experience in exporting ASTM A513 1010 Tubes worldwide.
- Responsive Customer Service: Our team is dedicated to providing prompt service and technical support.
Related Products
ASTM A513 tubing is often produced using these common steel grades. Explore our comprehensive range of other related products:
- ASTM A513 1008 Tubes & Pipes
- ASTM A513 1015 Tubes & Pipes
- ASTM A513 1020 Tubes & Pipes
- ASTM A513 1026 Tubes & Pipes
- ASTM A513 DOM Tubing
Explore ASTM A513 DOM Tubes & Pipes for enhanced strength, precision, and performance in demanding mechanical applications.
Get Your ASTM A513 1010 Tubes & Pipes Price & Consultation
For the latest Price, detailed technical specifications, or to discuss your specific project requirements for ASTM A513 1010 Tubes & Pipes (UNS G10100), contact the carbon steel tubing experts at Amardeep Steel Centre today. We are committed to providing high-quality ASTM A513 1010 Tubes and ASTM A513 1010 Pipes, along with tailored solutions for your mechanical and structural applications, including those requiring adherence to ASME SA513 1010.