Monel Pipe Fittings. Monel 400 is an alloy of nickel and copper that is very strong and works well (with trace
amounts of iron, manganese, carbon, and silicon content). It is very resistant to acids and alkalis, bends
well, lets heat pass through it well, and can only be made harder by cold working. Monel 400® can be used in
places where the temperature ranges from -100°F to 1,000°F (538°C).
Monel 400® is a "puritan alloy" that is different from other Monel® alloys because it has the same amounts of
nickel and copper as naturally occurring nickel ore from the Sudbury mines in Ontario, Canada.
Monel 400® is a "puritan alloy" that is different from other Monel® alloys because it has the same amounts of
nickel and copper as naturally occurring nickel ore from the Sudbury mines in Ontario, Canada.
Pipes are made from different types of metals and metal alloys. They can be put together with different kinds of
fittings. One of these parts is a Monel 400 Pipe Fitting, which is made of nickel copper alloy. Even at high
temperatures, Monel Pipe Fittings can stand up to steam and seawater. They can also stand up to salt and acids.
Fittings made of Monel used in fresh water are also said to resist stress corrosion cracking. High temperatures
and heat do not hurt these fittings. Even when they are frozen, Monel 400 Fittings have good mechanical
properties. Because of this, they are said to be very flexible.
ASTM B366 UNS N04400 is very resistant to both hydrofluoric acid and hydrochloric acid. Even in harsh
conditions, these Alloy 400 Fittings are flexible and last a long time. They are easy to take apart and put back
together. They are also easy to clean, so they don't cost much to keep up. Under high pressure and high
temperature, UNS N04400 Elbow is stronger and more resistant. The seals on these Nickel Alloy 400 Buttweld Tee
are also better in applications where the pressure is lower. They are very easy to bend and shape. They are
resistant to corrosion in pits and cracks.
Nickel 400 forged Fittings are used in hydraulic and pneumatic systems because they are strong and can handle a
lot of pressure. They are also resistant to corrosion in the sea environment. 2.4360 Eccentric/ Concentric
Pumps, valves, and shafts all use reducers. They are one of the pipes that industries that work with chemicals
and hydrocarbons use the most. Monel K500 2D/ 3D/ 9D Tube Bends are used in marine engineering and to clean
seawater. They are also used to process oil and gas, in heat exchangers, and to make electricity. They can also
be shaped in good ways.
| ASTM B366 UNS N04400 Monel 400 Pipe Fittings Specification |
ASTM B366, ASTM SB 366, ASTM B564, ASME SB564 |
|---|---|
| Equivalents: Monel 400/Alloy 400/Werkstoff 2.4360 |
|
| Inconel Pipe Fittings Grade | ASTM B366 UNS N04400 Monel 400 Fittings |
| Type | Seamless / Welded / Fabricated Monel 400 Pipe Fittings |
| Bending Radius | R=1D, 2D, 3D, 5D, 6D, 8D, 10D or Custom Monel 400 Pipe Fittings |
| Size Range | ½" NB to 24" NB in Sch 10s, 40s, 80s, 160s, XXS. (DN6~DN100) |
| Dimensions | ANSI/ASME B16.9, B16.28, MSS-SP-43. ASME 16.11, MSS SP-79, 83, 95, 97, BS 3799 |
| Pressure | Threaded end-2000lb/ 3000lb/ 6000lbs Monel 400 Pipe Fittings Socket-weld end-3000/ 6000/ 9000lbs Monel 400 Pipe Fittings |
| ASTM B366 UNS N04400 Monel 400 Pipe Fittings Thickness |
SCH10, SCH20, SCH30, STD SCH40, SCH60, XS, SCH80, SCH100, SCH120, SCH140, SCH160, XXS |
| Surface Treatment | Transparent oil, rust-proof black oil or hot galvanized |
| Special design | as your drawing |
| Test | Direct-reading Spectrograph, Hydrostatic testing machine, X-ray detector,
UI trasonic flaw detector, Magnetic particle detector |
| Grade | Inconel 600 (UNS N06600, Alloy 600, 2.4816), Inconel 601 (UNS N06601, Alloy
601, 2.4851), Inconel 625 (UNS N06625, Alloy 625, 2.4856), Inconel 800 (UNS N08800, Alloy 800) |
| Equipment | Press machine, Bending machine, Pushing Machine, electric bevelling machine Sand-blasting machine,etc |
| ASTM B366 UNS N04400 Monel 400 Pipe Fittings Origin |
West Europe / Japan / Indian / USA / Korean |
| Test Certificates for ASTM B366 UNS N04400 Monel 400 Pipe Fittings |
Manufacturer Test Certificate as per EN 10204 / 3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report |
MONEL 400 FORGED FITTINGS
MONEL 400 FORGED TEE
MONEL 400 PIPE END CAPS
| Monel 400 Forged Fittings | Alloy 400 Forged Fittings |
| Monel 400 Threaded Forged Pipe Fittings | Monel 400 Forged Tee |
| Monel 400 Couplings | Monel ASTM B564 Pipe Nipple |
| Monel Alloy End Pipe Cap | Monel Alloy Threaded pipe fittings Exporter |
| Alloy 400 Forged Pipe Fittings | Monel 400 High Pressure Forged Fittings Exporter |
| Alloy 400 90 deg Socket weld Elbow Stockist | 600 Alloy Union Manufacturer |
| Monel 400 Street Elbow | Alloy 400 Bushing Supplier |
| Monel UNS N04400 Equal Tees | Monel Werkstoff Nr. 2.4360 Forged Fittings |
| Monel 400 Forged Reducer | Monel 400 Cross |
| Monel 400 Welding Outlet | Monel 400 Socket Weld Outlet |
| Monel 400 Nipple Outlet | Monel 400 Reducing Tee |
| ASTM B564 Socket weld Forged Fittings Manufacturer | Monel 2.4360 Reducing Insert |
| ASME 16.11 Forged Elbow | ASME 16.11 Threaded Bushing |
| Grade | C | Mn | Si | Cu | S | Ti | Ni | Al | Fe |
| Monel 400 | 0.3 max | 2.0 max | 0.5 max | 28.0 – 34.0 | 0.02 max | - | 63.0 min | 0.50 max | 1.0 – 2.5 |
| Element | Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| Monel 400 | 8.8 g/cm3 | 1350 °C (2460 °F) | Psi – 80000 , MPa – 550 | Psi – 35000 , MPa – 240 | 40 % |
| STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN |
| Monel 400 | 2.4360 | N04400 | NW 4400 | NA 13 | МНЖМц 28-2,5-1,5 | NU-30M | NiCu30Fe |
Monel 400 Pipe Fittings typically finds application in:
• Marine Engineering
• Chemical Processing
• Hydro-carbon Processing
• Heat Exchangers
• Valves
• Pumps
| ASTM B366 /ASME SB366 | UNS N02200/WPN /CRN | UNS N02201/WPNL /CRNL | UNS N04400/WPNC /CRNC |
| UNS N06022/WPHC22 /CR HC22 | UNS N06025/WPV602 /CRV602 | UNS N06030/WPHG30 /CR HG30 | |
| UNS N06200/WHC2000 /CR HC2000 | UNS N06230/WPH230 /CRH230 | UNS N06455/WPHC4 /CR HC 4 | |
| UNS N06625/WPNCMC /CRNCMC | UNS N06985/WPHG3 /CR HG3 | UNS N08020/WP20CB /CR20CB | |
| UNS N08120/WPH120 /CRH120 | UNS N08330/WP330 /CR330 | UNS N08367/WP6XN /CR6XN | |
| UNS N08811/WPNIC11 /CRNIC11 | UNS N08825/WPNICMC /CRNICMC | UNS N08925/WP1925 /CR1925 | |
| UNS N10003/WPHN /CR HN | UNS N10276/WPHC276 /CR HC 276 | UNS N10629/WPVB4 /CRVB4 | |
| UNS N12160/WPH160 /CRH160 | UNS R20033/WP3033 /CR3033 | UNS R30556/WPH556 /CRH556 | |
| UNS N06002/WPHX /CR HX | UNS N06007/WPHG /CR HG | UNS N06045/WPV45TM /CRV45TM | |
| UNS N06600/WPNCI /CRNCI | UNS N06059/WP5923 /CR5923 | UNS N06603/WP603GT /CR603GT | |
| UNS N08904/WP904L /CR904L | UNS N08031/WP3127 /CR3127 | UNS N08800/WPNIC /CRNIC | |
| UNS N08926/WP1925N /CR1925N | UNS N08810/WPNIC10 /CRNIC10 | UNS N10001/WPHB /CR HB | |
| UNS N10665/WPHB-2 /CR HB2 | UNS N10675/WPHB-3 /CR HB3 |
|
Class |
Construction |
Non-destructive Examination |
|---|---|---|
|
S |
Seamless |
None |
|
W |
Welded |
Radiography or Ultrasonic |
|
WX |
Welded |
Radiography |
|
WU |
Welded |
Ultrasonic |
ASTM A182 – ASME SA182 – Standard Specification for Wrought Austenitic Stainless Steel Piping Fittings ASME B16.9 – Factory-Made Wrought Buttwelding Fittings ASME B16.11 – Socket Welding and Threaded Forged Fittings MSS SP-43 – Wrought and Fabricated Butt-Welding Fittings for Low Pressure, Corrosion Resistant Applications MSS SP-95 – Swage(d) Nipples and Bull Plugs BS3799 – Specification for Steel pipe fittings, screwed and Socket-welding for the petroleum industry Origin & Mills: Indian Origin, Japanese Origin, Korean Origin, European Origin, US Origin, Ukraine Origin, Russian Origin, Indian Mills, Japanese Mills, Korean Mills, European MIlls, US Mills, Russian Mills, Ukraine MIlls
| Products | Size | |
|---|---|---|
| Monel 400 90° Elbows | Alloy 400 Couplings | Sizes 1/8" -4" Pressure Ratings - 2000 LBS, 3000 LBS, 6000 LBS, 9000 LBS |
| Monel 45° Elbows | ASTM B366 UNS N04400 Reducers | |
| Nickel Alloy 400 Street Elbows | UNS N04400 Inserts | |
| Nickel 400 Tees | Monel Alloy 400 Caps | |
| DIN 2.4360 Crosses | Monel 400 Unions | |
• 90˚ Elbow (LR, SR, 3D or 5D)
• 45˚ Elbow (LR, SR, 3D or 5D)
• 180˚ Elbow (LR, SR)
| Marking | Product and Designation | |||||
|---|---|---|---|---|---|---|
| Corrosion Resistant Fittings | ASME Pressure Fittings | Alloy | UNS Designation | Pipe or Tube | Plate, Sheet, strip | Bar Forging, and Forging Stock |
| CRNCᶜ | WPNCᶜ | Ni-Cu | N04400 | B165 | B127 | B164, B564 |
Italy, Australia, Qatar, Slovakia, Netherlands, Bhutan, Sweden, Oman, Saudi Arabia, Morocco, Germany, Malaysia, Brazil, Taiwan, Bahrain, Finland, Zimbabwe, Sri Lanka, Norway, Serbia, Portugal, Hong Kong, Belgium, Namibia, Ireland, Thailand, Jordan, Denmark, Ecuador, Iraq, Trinidad & Tobago,Tunisia, Ukraine, South Africa, Mexico, India, Tibet, Japan, Spain, Gambia, United Kingdom, Bolivia, United States, Singapore, Romania, China, Croatia, Afghanistan, Macau, Egypt, United Arab Emirates, Chile, Poland, Puerto Rico, Nepal, Kenya, Switzerland, Bangladesh, Mexico, Austria, Bulgaria, Belarus, New Zealand, Lebanon, Peru, Czech Republic, Chile, Estonia, France, Israel, Argentina, Pakistan, Greece, Lithuania, Costa Rica, Kazakhstan, Ghana, Angola, Canada, Colombia, Mongolia, Hungary, Indonesia, Algeria, Turkey, Gabon, Poland, Kuwait, Azerbaijan, Philippines.
Riyadh, Ahvaz, Muscat, Coimbatore, Lagos, Sydney, Jamshedpur, Perth, Baroda, Ho Chi Minh City, Santiago, Kanpur, Howrah, Edmonton, Al Jubail, Chennai, Kuwait City, Mexico City, Atyrau, Doha, Nashik, Lahore, Hong Kong, Secunderabad, New York, Jeddah, Toronto, Calgary, Abu Dhabi, Nagpur, Courbevoie, Moscow, Colombo, Cairo, Ulsan, Jaipur, Indore, Sharjah, Al Khobar, Bhopal, Bogota, Navi Mumbai, New Delhi, Karachi, Houston, Kuala Lumpur, Kolkata, Pimpri-Chinchwad, Ernakulam, Madrid, Granada, Dubai, Tehran, Surat, Jakarta, Gurgaon, Manama, Thiruvananthapuram, Dallas, Hanoi, Istanbul, Rajkot, Noida, Bengaluru, Seoul, Chandigarh, Gimhae-si, Los Angeles, Vadodara, Algiers, Pune, Dammam, Thane, Melbourne, Bangkok, Caracas, Aberdeen, Port-of-Spain, Haryana, Faridabad, Milan, Ludhiana, Chiyoda, Ranchi, London, Mumbai, Busan, La Victoria, Rio de Janeiro, Vung Tau, Ahmedabad, Montreal, Brisbane, Singapore, Geoje-si, Hyderabad, Ankara, Visakhapatnam, Petaling Jaya.
