Gasket Manufacturers in India 

Industrial Gaskets Suppliers & Exporter in India

Amardeep Steel Centre LLP's gasket business runs on the same stock and ship model as the rest of its piping range. From Mumbai, the company manufactures, stocks, supplies and exports Ring Joint, Spiral Wound Metallic, Metal Jacketed, Non-Asbestos, PTFE, Rubber, Solid Metal, Graphite, Precision and Heat Exchanger gaskets to process plants in more than 60 countries. Thickness and specification are matched to each client's requirement, and the gaskets themselves turn up most often in machine seals, pump shafts, hydraulic cylinders and flanged pipe joints.

The wider piping range sits one click away: Flanges, Valves, Fasteners and Buttweld Pipe Fittings are all covered on the Products page, or a requirement can go straight to the Enquiry form for an instant quote.

Gasket Types We Supply

• Ring Joint Gaskets
• Spiral Wound Metallic Gaskets
• Metal Jacketed Gaskets
• Non-Asbestos Gaskets
• PTFE Gaskets
• Rubber Gaskets
• Solid Metal Gaskets
• Graphite Gaskets
• Precision Gaskets
• Heat Exchanger Gaskets

Gasket Standards, Sizes & Specifications

Gasket Types We Manufacture & Supply

Ring Joint Gaskets

These are machined on CNC equipment to tight tolerances in R, RX and BX styles, each available in oval and octagonal profiles. They are the standard choice in high-pressure, high-temperature oil and gas pipeline work, and are built fully to ASME B16.20 and API Spec 6A in both standard and special materials.

Spiral Wound Metallic Gaskets

A metal winding carries the gasket's structural strength while a non-metallic filler does the actual sealing, a combination that holds up well against leakage on high-temperature lines. Hardness and physical parameters are set per client requirement from quality raw materials, and for tube vessels and heat exchangers, these gaskets can also be supplied with inner and outer rings plus partition ribs.

Metal Jacketed Gaskets

Built for sealing flat surfaces, heat exchangers, gas pipes, cast iron flanges, autoclaves, valve covers and manholes among them, where a wide range of temperatures and mechanical loads needs to be resisted. Beyond the standard flat form, these are also available as frames, oval shapes or to other custom constructions.

Non-Asbestos Gaskets

Made from Compressed Non-Asbestos Jointing Sheets (CNAF, also called NACF), combining glass and aramid fibres with an NBR rubber binder. Hardness and physical parameters are adjusted per client requirement, and the shapes and sizes produced cover a wide range, with engines and hydraulic systems among the most common applications for fixing leakage problems.

PTFE Gaskets

The PTFE range covers both Envelope Gaskets and Sheet Gaskets, manufactured to whatever dimensions a job calls for at the in-house production facility. Fine chemicals, petrochemicals, pharmaceuticals and food processing are the industries that use this range most.

Rubber Gaskets

These are precision-machined low carbon steel gaskets encapsulated in a nitrile rubber casing, and they do three jobs at once: pressure testing with minimal damage to flanges, extra sealing at the rubber contact points, and protection of the flange faces themselves. As with the other ranges, hardness and physical parameters can be set to client requirement.

Solid Metal Gaskets

For service conditions where conventional gasket materials simply cannot cope, solid metal gaskets bring exceptional mechanical strength, heat conductivity and resistance to high pressure, high temperature and chemical attack. The gasket metal itself is chosen softer than the mating flange surfaces by design, and hardness and physical parameters are set per client requirement.

Graphite Gaskets

Built for the most extreme service conditions, self-lubricated and non-stick to flanges, in endless rings, rings with a single oblique cut, or split rings with oblique cuts. The construction is designed to give the right compression with a high percentage of recovery and low creep relaxation, which is why these turn up most often sealing valves, pumps and expansion joints.

Precision Gaskets

Manufactured to close tolerance with hardness and physical parameters set per client requirement, these are used widely across industrial processes. Cutting services are also offered to client specification, with the team working alongside customers to land on the most economical part without giving up consistency or quality.

Heat Exchanger Gaskets

Where low seating stress and good performance both matter, this is the range to use, and the right type depends on the exchanger's actual operating conditions. Metallic options span Double and Single Jacket, Solid Metal and Spiral Wound constructions, chosen for service where extreme temperatures and thermal-expansion movement are expected.

Gasket Manufacturing & Quality

• Precision CNC machining to specific tolerances for ring joint, spiral wound and metal jacketed constructions
• Material selection matched to service temperature, pressure and chemical compatibility
• Cutting and fabrication to client drawing for non-standard sizes and thicknesses
• EN 10204 3.1/3.2 material certification, with IBR test certification available on request

Applications & Industries We Serve

These gaskets supply Chemicals, Petrochemicals, Oil & Natural Gas, Fertilizers, Sugar Mills & Distilleries, Cement, Ship Building, Paper, Pumps & Automation, Paints and general Steel plants, turning up in flange connections, pipe connections, machine seals, pump shafts and hydraulic cylinders. Six sectors account for most of that demand:

• Oil & Gas: pipelines, valves and pump sealing
• Petrochemical & Chemical Processing: reactors, distillation columns, tanks, pipes and vessels
• Power Generation: boilers, turbines and generators
• Pharmaceutical & Food Processing: hygienic sealing for process equipment
• Pulp & Paper: process piping and equipment sealing
• Water & Wastewater Treatment: sealing between filters, pumps and valves

Why Choose Us as Your Gasket Manufacturer & Supplier in India

• A genuinely comprehensive range across 10 gasket families, each manufactured to the specification and thickness a client actually needs
• EN 10204 3.1/3.2 material certification, with IBR test certification available on request
• Precision CNC machining and custom cutting to client drawing
• Competitive pricing across the full gasket range
• Regular exports to 60+ countries across the Middle East, Africa, Europe, the Americas and South-East Asia

Gasket Exporter — Countries We Serve

Regular export destinations include Kuwait, UAE, UK, Iran, Iraq, Qatar, Bahrain, Oman, Yemen, Lebanon, Jordan, Saudi Arabia, Malaysia, Indonesia, Singapore, Australia, New Zealand, USA, Canada, Mexico, Brazil, the Netherlands, Germany, Italy, Spain, Poland, South Africa, Turkey, Egypt and Sri Lanka, part of a footprint now covering more than 60 countries.