ASTM A519 1020 Tubing Suppliers, ASTM A519 1020 Pipe Manufacturers In India, Astm A519 Steel tubes Manufacturers In India, Astm A519 1020 Pipe Suppliers, Astm A519 1020 Pipe Manufacturers, ASTM A519 Type2 Steel Tubing, A519 1020 Pipe Manufacturers, A519 1020 Pipe Suppliers in India, prices of ASTM A519 1020 tube.
ASTM A519 1020 Tubing, ASTM A519 Grade 1020 Tubing Suppliers In India, ASTM A519 Square & Rectangle Tubing, ASTM A519 1020 Round Tubing, ASTM A519 1020 Pipe, ASME SA 513 1020 Pipe, ASTM A519 1020 pipe, ASTM A519 1020 rectangular tubing, ASTM A519 1020 pipe, astm A519 1020, astm A519 1020, astm A519 1020 pipe, astm A519 1020 tube in India.
Amardeep Steel Center is one of the obvious makers, Stockists, Trader, Suppliers, and Exporters of Carbon Steel A519 1020 Tube that is being made and arranged according to worldwide quality standards. ASTM A519 Grade 1020 Carbon Steel Seamless Tubings are Low Carbon Steel Tubings with 0.18-0.23 % carbon content with a mix of 0.30-0.60 % manganese. These Tubings are otherwise called gentle steel lines and cylinders. ASTM A519 Grade 1020 Tubings are minimal expense Tubings simple to frame and shape. These lines are fabricated according to ASTM Specification and monetarily alluded as cs lines or ms pipes. Low Carbon Steel Pipes are not generally as hard as high carbon steel pipes,Though carburizing can expand its surface hardness.
ASTM A519 Grade 1020 particularly covers a few grades of carbon and combination steel consistent mechanical tubing. When welding is utilized for joining the weld capable mechanical cylinder grades, the welding technique will be reasonable for the grade, the state of the parts, and the planned assistance. Suggested pipe size will be created by endless supply of your request. A print or sketch of the part to be delivered ought to be incorporated. Grade, chemical analysis and surface condition are carefully considered, and creation processes are customized to accomplish the best tubing for the end use.
ASME SA a519 Grade 1020 Seamless Tubings stockist in Mumbai, India. Amardeep Steel Center stocks a total scope of IBR Certified ASME SA 519 Grade 1020 Carbon Steel Seamless Tubings in external measurement tube sizes ½"- 24" and Nominal bore NB sizes 15NB-600NB in Mumbai, India.
ASTM A519 SAE1020 seamless tubing Chemical Composition (%):
| Grade | C | Mn | P<= | S<= |
|---|---|---|---|---|
| 1020 | 0.18-0.23 | 0.30-0.60 | 0.040 | 0.050 |
Mechanical Properties :
| Yield Strength | Tensile Strength | Elongation A5 min | |||
|---|---|---|---|---|---|
| MPa min | ksi min | MPa min | MPa min | ksi min | Percentage |
| 345 | - | 50 | 25 |
Equivalent Designation :
| DIN | EN | BS | NFA | ASTM | ASME |
|---|---|---|---|---|---|
| DIN 23912) Grade St 45 | - | - | ASTM A519 Grade 1020 | ASME SA 519 Grade 1020 | - |
Wall Thickness Tolerances for Cold Finished Tubing :
| Wall Thickness Tolerances for Cold Finished Tubing | ||
|---|---|---|
| Wall Thickness S/ Outside Diameter D (%) | Wall Thickness Tolerance (±%) | |
| Inside Diameter D < 38.1mm | Inside Diameter >= 38.1 | |
| <=25% | 10.0 | 7.5 |
| > 25% | 12.5 | 10.0 |
Outside Diameter Tolerances for round Hot-Finished Tubing:
| Outside Diameter Size Range, In.(mm) | Outside Diameter Tolerance, in. (mm) | |
|---|---|---|
| Over (+) | Under (-) | |
| up to 2.999 (76.17) | 0.020 (0.51) | 0.020 (0.51) |
| 3.000-4.499 (76.20-114.27) | 0.025 (0.64) | 0.025 (0.64) |
| 4.500–5.999 (114.30–152.37) | 0.031 (0.79) | 0.031 (0.79) |
| 6.000–7.499 (152.40–190.47) | 0.037 (0.94) | 0.037 (0.94) |
| 7.500–8.999 (190.50–228.57) | 0.045 (1.14) | 0.045 (1.14) |
| 9.000–10.750 (228.60–273.05) | 0.050 (1.27) | 0.050 (1.27) |
| A diameter tolerance is not applicable to normalized and tempered or quenched and tempered conditions. | ||
| B The common range of sizes of hot finished tubes is 11⁄2 in. (38.1 mm) to 103⁄4 in. (273.0 mm) outside diameter with wall thickness at least 3 % or more of outside diameter, but not less than 0.095 in. (2.41 mm). | ||
| C Larger sizes are available; consult manufacturers for sizes and tolerances. | ||
Wall Thickness Tolerances for round Hot-Finished Tubing :
| Wall Thickness Tolerances for Round Hot-Finished Tubing | |||
|---|---|---|---|
| Wall Thickness Range as Percent of Outside Diameter | Wall Thickness Tolerance, percent Over A and Under Nominal | ||
| Outside Diameter 2.999 in. (76.19 mm) and smaller | Outside Diameter 3.000 in. (76.20 mm) to 5.999 in. (152.37 mm) | Outside Diameter 6.000 in. (152.40 mm) to 10.750 in. (273.05 mm) | |
| Under 15 | 12.5 | 10 | 10 |
| 15 and over | 10 | 7.5 | 10 |
| A wall thickness tolerance may not be applicable to walls 0.199 in. (5.05 mm) and less; consult the manufacturer for wall tolerances on such tube sizes. | |||
