
Amardeep Steel is a brass products manufacturer in India supplying seamless brass pipes and tubes, brass hollow bars and rods, naval brass plates and sheets, brass finned tubes and brass tube plugs. We stock lead-free, low-lead, naval, admiralty, aluminium, DZR and Muntz metal grades to ASTM, EN, BS, JIS, NFA and IS standards. Our brass goes into condenser tubes, heat exchanger tubes, marine systems, plumbing, valves and fittings, and every order ships with an EN 10204 3.1 mill test certificate.
Brass Product Categories
Brass Pipes & Tubes
Grades under dropdown: CuZn30 brass tubes, CuZn37 brass tubes, CZ121 brass tubes, C28000 60/40 Muntz metal tubes, C37000 Muntz metal pipes
Brass Grade Comparison – Which Brass Do You Need?
Pick a grade by the job: corrosion resistance, lead content for drinking water, how easily it machines, or strength. Each family name links to its category page.
| Family | Typical grades | Nominal composition | Key property | Typical use |
|---|---|---|---|---|
C26000, C27000, C27200, C27400, CuZn30, CuZn37 |
Cu 63–70%, balance Zn |
Good cold formability, no added lead |
Plumbing, potable water |
|
C28000, C37000, CuZn40 |
Cu ~60%, Zn ~40% |
Higher strength, hot workable |
Condenser plates, valve bodies |
|
C33000, C36300, C36500, C36000, CW705R |
Cu 60–67%, small Pb |
Good machinability |
Fittings, valve parts |
|
C46400, C48200, CZ112, CW719R |
Cu ~60%, Sn ~0.75%, bal. Zn |
Seawater corrosion resistance |
Marine hardware, tube plates |
|
C44300, CZ111, CW706R |
Cu ~71%, Sn ~1%, As inhibited |
Resists dezincification |
Condenser & heat-exchanger tubes |
|
C68700, CZ110, CuZn20Al2As |
Cu ~77.5%, Al ~2%, As inhibited |
Resists erosion in fast seawater |
Marine condensers, desalination |
|
C35330, CW602N, CZ132, C69300 |
Cu 61–77%, As or Si added |
Dezincification-resistant |
Potable-water valves, fittings |
Brass Specifications & Standards
| Category | Specifications |
|---|---|
Standards |
ASTM B111, B135, B43, B16, B21, B455; EN 12449, EN 12451, EN 12164, EN 12165; BS 2871 Part 3; JIS H3300; NFA 51-102; IS 319 |
Available Forms |
Seamless Pipes & Tubes, U-Bend Tubes, Finned Tubes, Hollow Bars, Round & Hex Bars and Rods, Plates, Sheets, Tube Plugs |
Tube Outer Diameter (OD) |
6–219 mm |
Wall Thickness |
0.5–10 mm |
Available Lengths |
Single Random Length, Double Random Length, Cut Length; U-Bends as per Drawing |
Temper |
Annealed (O), Half Hard, Hard, Stress Relieved |
Testing |
Eddy Current Test, Hydrostatic Test, Flattening Test and Flaring Test |
Inspection & Certification |
EN 10204 3.1 Material Test Certificate (MTC); Third-Party Inspection Available on Request |
Industries We Supply Brass To
We supply power plants and surface condensers, shipbuilding and marine, desalination, oil & gas heat exchangers, HVAC and refrigeration, plumbing and potable water, valve and fitting makers, and general engineering. See our completed projects. For seawater service you may also need copper-nickel pipes and tubes.
Why Buy Brass from Amardeep Steel
- One brass products supplier for lead-free, low-lead, naval, admiralty, aluminium, DZR and Muntz grades
- Stock held in common sizes, with cut-to-length and U-bending
- Full traceability with EN 10204 3.1 and TUV, BV, SGS or Lloyd’s on request
- Brass products exporter to the UAE, Saudi Arabia, Qatar, Europe, the USA, Canada and South-East Asia
Get a Quote for Brass Products
Send us the grade, size, quantity and delivery location for a brass product's price.
Request a Quote Contact UsFrequently Asked Questions – Brass Products
1. Which brass grade is best for seawater condensers?
Aluminium brass (C68700 / CZ110) for high-velocity seawater. Admiralty brass (C44300 / CZ111) for fresh and brackish cooling water.
2. What is the difference between lead-free and low-lead brass?
Lead-free brass (C26000, C27450) has no added lead, so it meets potable-water rules. Low-lead brass (C33000, C36500) has a little lead to make it easier to machine.
3. What is DZR brass?
Dezincification-resistant brass (CW602N, C35330) has arsenic added and is heat treated, so zinc does not leach out in aggressive water. It is used for valves and fittings.
4. What is the difference between naval and admiralty brass?
Both contain tin. Naval brass is about 60/40 copper-zinc, used for rods, plates and marine hardware. Admiralty brass is about 70/30 with arsenic, mainly for heat-exchanger tubes.
5. Do you supply brass with mill test certificates?
Yes. Every order ships with EN 10204 3.1, and third-party inspection can be arranged.









