
You will see the JIS H 3300 C6870 aluminum brass pipe when you have a Japanese drawing in case the cooling water is seawater or brackish and the pipe has to endure high-speed flow. This grade matches UNS C68700 in terms of composition resulting in queries from buyers buying ASTM B111 pipe about whether it is interchangeable with the other. The limits of the composition are the same but the test requirements and tolerances are different meaning that the order needs to be made naming the required variant.
Amardeep Steel Centre is a supplier of JIS H3300 C6870 pipe and tube in Mumbai. This type of aluminium brass is used in various industries like condensers, heat exchangers, desalination, and shipping. It is known by different names like C6870 tube, UNS C68700 tube and CuZn20Al2As tube, depending on the buyers’ requirements. If your drawing follows ASTM instead, our ASME SB111 UNS C68700 seamless tube page and aluminium brass seamless tube page carry that data.
JIS H 3300 C6870 Aluminium Brass Pipe Specifications at a Glance
Parameter | Detail |
|---|---|
Standard | JIS H 3300, copper and copper alloy seamless pipes and tubes |
Grade | C6870 aluminium brass |
Dimensional tolerance | Per JIS H 3300 for the size band, tolerance class confirmed at quotation |
Surface finish | Bright annealed or as drawn, as agreed with the order |
UNS equivalent | C68700, ASTM B111 |
EN equivalent | CuZn20Al2As, CW702R, EN 12451 |
Product form | Seamless pipe and tube |
Outside diameter and wall | Supplied against your drawing. State both in your enquiry. |
Length | Random or cut to length, as agreed with the order |
Temper | O, OL, half hard and hard, as defined in the JIS tables |
Testing and certificates | Tests called for by the standard and your order, mill test certificate to EN 10204 3.1 |
JIS H 3300 C6870 Aluminium Brass Pipe Chemical Composition
Element | Limit, per cent | What it does |
|---|---|---|
Copper | 76.0 to 79.0 | The base of the alloy |
Aluminium | 1.8 to 2.5 | Builds the protective surface film |
Arsenic | 0.02 to 0.06 | Stops dezincification |
Lead | 0.07 maximum | Kept low, since this is not a free cutting brass |
Iron | 0.06 maximum | Impurity limit |
Zinc | Remainder, about 20.5 | Balance of the alloy |
Mechanical Properties of JIS H 3300 C6870 Aluminium Brass Pipe
Property | Typical value |
|---|---|
Tensile strength | About 415 MPa (60 ksi) |
Yield strength (0.5% extension) | About 185 MPa (27 ksi) |
Elongation | About 55% |
Hardness | About 55 HRB |
Physical Properties of JIS H 3300 C6870 Aluminium Brass Pipe
Property | SI | Imperial |
|---|---|---|
Density | 8.33 g/cm3 | 0.301 lb/in3 at 68 F |
Specific gravity | 8.33 | 8.33 |
Melting range | 932 to 971 °C (solidus to liquidus) | 1710 to 1780 F |
Coefficient of thermal expansion | 18.5 micrometres per metre per kelvin, 20 to 300 °C | 10.3 millionths per F, 68 to 572 F |
Thermal conductivity | About 100 W/m K at 20 °C | 58.0 Btu per foot per hour per F at 68 F |
Electrical conductivity | 23 %IACS at 20 °C | 23 %IACS at 68 F |
Electrical resistivity | About 0.075 micro ohm metre | 45.1 ohm circular mil per foot at 68 F |
Specific heat | About 377 J/kg K | 0.09 Btu per pound per F at 68 F |
Modulus of elasticity in tension | About 110 GPa | 16000 ksi |
Modulus of rigidity | About 41 GPa | 6000 ksi |
C6870 Equivalent Grades and Standards
Standard | Designation |
|---|---|
JIS | C6870 (JIS H 3300) |
UNS | C68700 |
ASTM and ASME | B111 and SB111 |
EN | CuZn20Al2As, CW702R (EN 12451) |
ISO | CuZn20Al2 |
BS | CZ110 |
Applications of JIS H 3300 C6870 Aluminium Brass
- Aluminium brass condenser tube: surface condensers in power stations, on land and at sea, where cooling water moves fast.
- Heat exchangers: shell and tube units running on seawater or brackish cooling water.
- Evaporator and distiller tubes: desalination plants that need a tube which resists erosion.
- Ferrules and related fittings: parts that sit in the same water as the tube.
- Marine and shipboard systems: cooling circuits where weight and corrosion both matter.
See our condenser tubes range for the wider choice of materials.
Tell Us the Water and the Service, Get the Right Grade
Frequently Asked Questions
1. What is JIS H 3300 C6870 aluminium brass pipe?
It is seamless pipe made from C6870, an aluminium brass with about 77.5 per cent copper, 2 per cent aluminium and a little arsenic, supplied to JIS H 3300, the Japanese standard for copper and copper alloy seamless pipes and tubes. It is used mainly in condensers and heat exchangers that run on cooling water.
2. Is C6870 the same as UNS C68700?
They are the same alloy family, and buyers treat them as equivalents, since both are arsenical aluminium brass with 76.0 to 79.0 per cent copper and 1.8 to 2.5 per cent aluminium. The test limits and tolerances come from different standards though, JIS H 3300 for C6870 and ASTM B111 for C68700, so name the standard on your order.
3. What is the difference between C6870 and admiralty brass?
Admiralty brass is a copper zinc alloy with tin, while C6870 is a copper zinc alloy with aluminium. The aluminium builds a protective film that holds up better against fast moving cooling water, which is why C6870 is chosen where admiralty brass has suffered impingement attack. Admiralty brass costs less and suits calmer service.
4. Why does aluminium brass contain arsenic?
Arsenic is added in small amounts, usually 0.02 to 0.06 per cent, to stop dezincification, where zinc leaches out of the brass and leaves a weak copper structure. Without it, brass with this much zinc can fail in some waters. Check the arsenic limit your standard allows and ask for it on the certificate.
5. What sizes of C6870 pipe do you supply?
We quote C6870 pipe against your drawing, so send the outside diameter, wall thickness, length and quantity. Condenser sizes and heavier wall pipe can both be discussed, and cut lengths can be agreed with the order. Confirm standard, temper and certificate in the same enquiry so the quotation matches your tender.
6. Is C6870 suitable for seawater service?
C6870 is a long standing choice for seawater and brackish cooling water, because its aluminium film resists impingement at higher velocity. It is not the right choice for water carrying sulphides, such as polluted harbours, where copper nickel does better. Tell us the water and the velocity and we will help you choose.
Looking to Enquire or Place an Order?
Send us the standard, the size and the quantity, and tell us what water the pipe will carry. We will come back with a price, a delivery date and an honest view on whether aluminium brass is the right alloy for the job.
Explore Related Ranges
- Aluminium brass seamless tube: the same family supplied to ASTM B111.
- ASME SB111 UNS C68700 seamless tube: the ASME specification route for C68700.
- Admiralty brass seamless tube: the lower cost alternative for calmer water.
- Copper nickel 90 10 pipes and tubes: for severe or polluted service.
- Condenser tubes: the full range of condenser materials.
- Heat exchanger tubes: tubes for shell and tube duty.
