
Brass Hollow Bars & Rods Manufacturer, Supplier & Exporter in India
CW602N • CZ132 • C35330 • C36000 • C48600 • C27450 • C69300
Many brass parts have a hole through the middle. Valve bodies, cable glands, bushes, sleeves and pipe fittings all start life as a bar that needs boring. Begin with a solid bar and much of that metal ends up as swarf, along with hours of drilling time and worn tooling. A brass hollow bar arrives with the bore already formed, so the machinist only finishes what is left.
That simple change cuts raw material, scrap and cycle time on every part. It also lowers the working capital locked in stock. Amardeep Steel supplies brass hollow bars and brass hollow rods in free-cutting, dezincification-resistant (DZR), tin-bearing, lead-free and eco brass grades. Every order is cut to length and ships with an EN 10204 3.1 mill test certificate.
Brass Hollow Bar Grades We Supply
Choose a Hollow Bar by Use
| Need | Best grade | Typical parts |
|---|---|---|
Fastest machining, no water contact | C36000 free-cutting | Cable glands, precision turned parts, electrical parts |
Drinking water and plumbing | CW602N, CZ132, C35330 (DZR) | Valve bodies, stopcocks, taps, compression fittings |
Strict lead limits | C27450, C69300 | Potable-water components, PEX fittings, food equipment |
Seawater and marine service | C48600 | Marine fittings, seawater valve parts, bushes |
Brass Hollow Bar Specifications
| Parameter | Details |
|---|---|
Shapes | Round and hexagonal hollow bars; other profiles to drawing |
Outer and bore size | As per customer drawing |
Manufacturing | Hot extruded, cold drawn |
Length | Random lengths or cut to length |
Finish | Extruded, drawn, bright |
Standards | EN 12164, EN 12165, ASTM B16, ASTM B455, BS 2874, IS 319 |
Certification | EN 10204 3.1 MTC; third-party inspection (TUV, BV, SGS, Lloyd’s) on request |
Chemical Composition of Brass Hollow Bars (%)
| Grade | Cu | Pb | Other | Zn |
|---|---|---|---|---|
CW602N / CZ132 (CuZn36Pb2As) | 61.0–63.0 | 1.7–2.8 | As 0.02–0.15 | Rem. |
C36000 | 60.0–63.0 | 2.5–3.7 | Fe 0.35 max | Rem. |
C48600 | 59.0–62.0 | 1.0–2.5 | Sn 0.3–1.5, As 0.02–0.25 | Rem. |
C27450 | 60.0–65.0 | 0.25 max | Fe 0.35 max | Rem. |
C69300 | 73.0–77.0 | 0.09 max | Si 2.7–3.4, P 0.04–0.15 | Rem. |
C35330 is supplied to ASTM limits, shown on the mill certificate for each order.
Hollow Bar vs Solid Bar
| Solid brass bar | Brass hollow bar | |
|---|---|---|
Bore | Drilled or bored by the machinist | Formed during extrusion |
Material bought | Full section, much of it cut away | Only the wall that the part needs |
Scrap | High | Low |
Machining time | Longer, with drilling and boring | Shorter, finishing only |
Tool wear | Higher | Lower |
Best for | Parts with small or no bore | Valves, glands, bushes, sleeves, fittings |
Applications of Brass Hollow Bars & Rods
- Valve bodies, stopcocks and ball-valve parts
- Cable glands and electrical fittings
- Bushes, sleeves and bearing housings
- Plumbing and compression fittings
- Pump parts and hydraulic components
- Automobile, synchroniser and watch-case parts
- Marine fittings and seawater valve parts
For tube rather than bar, see our brass pipes and tubes. For low-lead tube grades, see low lead brass pipes and tubes, and for solid bar, brass round bars.
FAQs – Brass Hollow Bars & Rods
1. What is a brass hollow bar?
A brass bar extruded with a hole already through its centre. It replaces the solid bar when the finished part needs a bore.
2. Why use a hollow bar instead of a solid bar?
It saves material, scrap and drilling time, so each part costs less to make.
3. What is DZR brass hollow bar?
Dezincification-resistant brass, such as CW602N or CZ132. Arsenic stops zinc leaching out in aggressive water, so it is used for plumbing valves and fittings.
4. What sizes of brass hollow bar can you supply?
Outer size and bore are made to your drawing, in round or hexagonal section. Send us your dimensions for a quote.
.webp)

.webp)




