
Low Lead Brass Pipes & Tubes Manufacturer, Supplier & Exporter in India
C33000 • C36300 • C36500 • C27450 • CuZn40 • CW705R
Lead has long been added to brass for one reason. It makes the metal cut cleanly. The trade-off is lead in the finished part, which matters in taps, valves, pumps and fittings that touch drinking water. Low lead brass keeps lead to a small, controlled amount, usually 0.25 -- 0.7%. That is enough to give good chip-breaking on a lathe, without the 2–3% found in conventional free-cutting brass.
Amardeep Steel supplies low lead brass pipes and tubes in six grades for manufacturers who need parts that machine well, braze cleanly and fit stricter lead limits. Our seamless tubes range from 6 mm to 219 mm OD with walls from 0.5 mm to 10 mm. They are cut to length or bent to drawing, and every shipment carries an EN 10204 3.1 mill test certificate.
Low Lead Brass Grades We Supply
Low Lead Brass Tube Specifications
| Parameter | Details |
|---|---|
Outside diameter | 6–219 mm |
Wall thickness | 0.5–10 mm |
Type | Seamless (extruded and cold drawn) |
Shapes | Round, square, rectangular, U-bend |
Length | Single random, double random, cut length |
Temper | Annealed (O), half hard, hard |
Finish | Mill, bright, polished |
Standards | ASTM B135, EN 12449, JIS H3300 |
Testing | Eddy current, hydrostatic, flattening and flaring tests |
Certification | EN 10204 3.1 MTC; third-party inspection (TUV, BV, SGS, Lloyd’s) on request |
Chemical Composition of Low Lead Brass (%)
| Grade | Cu | Pb | Fe max | Other | Zn |
|---|---|---|---|---|---|
C33000 | 65.0–68.0 | 0.25–0.7 | 0.07 | – | Rem. |
C36300 | 61.0–63.0 | 0.25–0.7 | 0.15 | P 0.04–0.15 | Rem. |
C36500 | 58.0–61.0 | 0.25–0.7 | 0.15 | Sn 0.25 max | Rem. |
C27450 | 60.0–65.0 | 0.25 max | 0.35 | – | Rem. |
CuZn40 (CW509L) | 59.5–61.5 | 0.3 max | 0.2 | – | Rem. |
CW705R pipes are supplied to the chemistry stated on the mill certificate for each order.
Low Lead vs Lead-Free vs Free-Cutting Brass
| Free-cutting brass | Low lead brass | Lead-free brass | |
|---|---|---|---|
Typical lead | 2.5–3.5% | 0.25–0.7% | 0.25% max or less |
Example grades | C36000, CZ121 | C33000, C36300, C36500 | C27450, C26000, C27200 |
Machinability | Best | Good | Fair to good |
Best for | High-volume turned parts, no water contact | Machined fittings, pump and valve parts | Drinking-water and food-contact parts |
Our page | This page |
In the USA, parts touching drinking water must average no more than 0.25% lead across wetted surfaces under the Reduction of Lead in Drinking Water Act. Check whether your part needs a lead-free grade or whether low lead brass will do.
Fabrication Properties
| Process | C33000 | C36300 | C36500 | C27450 |
|---|---|---|---|---|
Machining | Good | Very good | Very good | Good |
Cold working | Excellent | Good | Fair | Good |
Hot forming / forging | Poor | Good | Excellent | Good |
Soldering & brazing | Excellent | Excellent | Excellent | Excellent |
Thread rolling | Good | Excellent | Excellent | Excellent |
Welding | Not recommended (lead) | Not recommended | Not recommended | Fair |
Applications of Low Lead Brass Pipes & Tubes
- Pump cylinder liners and pump lines
- Plumbing accessories, taps and faucet bodies
- Valve stems, valve bodies and ball-valve parts
- Screw-machined fittings and connectors
- PEX plumbing fittings and manifolds
- Forged components for water systems
- J-bends, traps and drain fittings
For condenser and heat-exchanger duty, see admiralty brass tubes or aluminium brass tubes. For machined bushes and valve parts in bar form, see C27450 DZR lead-free brass hollow bars, C36000 leaded brass hollow rods and our full range of brass and DZR hollow bars.
FAQs – Low Lead Brass Pipes & Tubes
1. What is low lead brass?
Brass with a small, controlled lead content, usually 0.25–0.7%. It machines well while carrying far less lead than free-cutting brass.
2. Is low lead brass the same as lead-free brass?
No. Lead-free brass is limited to 0.25% lead or less for drinking-water parts. Low lead brass may contain up to about 0.7%.
3. Which low lead brass grade machines best?
C36300 and C36500 come closest to free-cutting brass. C33000 is the better choice when the tube also needs bending or forming.
4. Can low lead brass tubes be welded?
Welding is not recommended for lead grades. Use soldering or brazing instead.

.webp)



.webp)

