
NFA 51 102 Admiralty Brass Pipes are copper alloy seamless tubes produced from the CuZn29Sn1 alloy, intended for use in heat transfer equipment that works with freshwater, brackish water, and seawater. The chemical composition of the alloy is 71% copper, 1% tin, a small amount of arsenic, and the rest is zinc. This controlled amount of arsenic prevents dezincification, and the alloy composition allows for corrosion resistance in water cooling applications. The alloy was standardized under the French norm NFA 51-102 and is similar to the modern EN 12451 alloy CW706R (CuZn28Sn1As). Amardeep Steel provides quality tested Admiralty Brass Pipes for domestic and international usage and has a mill test certificate with it.
Specifications of NFA 51 102 Admiralty Brass Pipe
Parameter | Specification |
|---|---|
Standard | NF A 51-102 (former French); supplied to NF EN 12451 or ASTM B111 as equivalent on request |
Material | Admiralty brass, CuZn29Sn1 (EN 12451 CuZn28Sn1As, CW706R; UNS C44300) |
Type | Seamless, cold drawn |
Outside Diameter (OD) | 6 mm to 108 mm (standard condenser and exchanger range; larger sizes on request) |
Wall Thickness | 0.5 mm to 3.0 mm |
Length | Straight lengths up to 15 m, cut to length, or U-bends |
Condition | Annealed (soft); half-hard on request |
Ends | Plain ends |
Testing | Eddy current or hydrostatic, flattening, flaring, expansion, grain size |
Documentation | EN 10204 3.1 mill test certificate; 3.2 or third-party inspection on request |
Chemical Composition of NFA 51 102 Admiralty Brass Pipe
Element | NF A 51-102 CuZn29Sn1 (%) |
|---|---|
Copper (Cu) | 70.0 to 73.0 |
Tin (Sn) | 0.9 to 1.2 |
Arsenic (As) | 0.02 to 0.06 |
Lead (Pb), max | 0.07 |
Iron (Fe), max | 0.06 |
Zinc (Zn) | Remainder |
Total Impurities, max | 0.3 |
Nfa 51 102 Admiralty Brass Pipe Mechanical Properties
Property | Value | Basis |
|---|---|---|
Hardness | 80 to 120 HV5 | NF A 51-102 (annealed) |
Grain Size | 0.010 to 0.045 mm | NF A 51-102 |
Tensile Strength, min | 310 MPa (45 ksi) | ASTM B111 C44300, O61 annealed basis |
Yield Strength, min | 105 MPa (15 ksi) | ASTM B111 C44300, O61 annealed basis |
Physical Properties of Nfa 51 102 Admiralty Brass Pipe
Physical Property | Metric | Imperial |
|---|---|---|
Density | 8.53 g/cm³ | 0.308 lb/in³ |
Melting Range | 900 to 935°C | 1,650 to 1,720°F |
Thermal Conductivity (20°C) | 111 W/m·K | 64 Btu/ft·h·°F |
Electrical Conductivity | 25% IACS | 25% IACS |
Thermal Expansion (20 to 300°C) | 20.2 µm/m·K | 11.2 µin/in·°F |
Modulus of Elasticity | 110 GPa | 16,000 ksi |
Equivalent Grades of Nfa 51 102 Admiralty Brass Pipe
Standard | Designation | Tin (%) | Arsenic (%) |
|---|---|---|---|
NF A 51-102 (former French) | CuZn29Sn1 | 0.9 to 1.2 | 0.02 to 0.06 |
EN 12451 (current European) | CuZn28Sn1As, CW706R | Confirm on certificate | Confirm on certificate |
ASTM B111 / ASME SB111 | UNS C44300 | 0.8 to 1.2 | 0.02 to 0.06 |
BS 2871 Part 3 (former British) | CZ111 | 1.0 to 1.5 | 0.02 to 0.06 |
DIN 1785 (former German) | CuZn28Sn1 | 0.9 to 1.3 | 0.02 to 0.035 |
JIS H3300 | C4430 | 0.9 to 1.2 | 0.02 to 0.06 |
IS 1545 (India) | CuZn29Sn1As | 1.0 to 1.5 | 0.02 to 0.06 |
Sizes Chart of Nfa 51 102 Admiralty Brass Pipe
OD (inch) | OD (mm) | Common Walls (BWG / mm) | Stock Status |
|---|---|---|---|
1/2" | 12.70 | 20 / 0.89, 18 / 1.24 | Available on order |
5/8" | 15.88 | 20 / 0.89, 18 / 1.24, 16 / 1.65 | Standard stock |
3/4" | 19.05 | 18 / 1.24, 16 / 1.65, 14 / 2.11 | Standard stock |
7/8" | 22.23 | 18 / 1.24, 16 / 1.65 | Available on order |
1" | 25.40 | 18 / 1.24, 16 / 1.65, 14 / 2.11 | Standard stock |
1 1/4" | 31.75 | 16 / 1.65, 14 / 2.11 | Available on order |
Applications and Industrial Uses of Nfa 51 102 Admiralty Brass Pipe
- Marine Industry
- Shipbuilding Industry
- Power Generation Industry
- Steam turbine condensers
- Petrochemical Industry
- Desalination Industry
- Evaporators and distillers
- Industrial Cooling Industry
Frequently Asked Questions
1. What is NFA 51 102 Admiralty Brass?
It is Admiralty Brass to NF A 51-102, the former French standard for heat exchanger tubes: about 71% copper, 1% tin, a trace of arsenic, and zinc.
2. Is NF A 51-102 still a current standard?
No. AFNOR has cancelled NF A 51-102. It has been superseded by NF EN 12451 for seamless heat exchanger tubes and NF EN 12452 for finned tubes.
3. What is the EN equivalent of NFA 51 102 CuZn29Sn1?
The corresponding EN 12451 grade is CuZn28Sn1As, identified by material number CW706R.
4. Can EN 12451 tube replace NF A 51-102 tube?
Usually yes. EN 12451 CuZn28Sn1As is a close equivalent; check tin and arsenic on the mill certificate against your drawing before ordering.
5. Why is tin added to Admiralty Brass?
Approximately 1% tin improves resistance to freshwater, brackish water, and seawater corrosion compared with standard 70/30 brass.
6. Why does Admiralty Brass contain arsenic?
Arsenic, typically 0.02–0.06%, helps inhibit dezincification, a corrosion process in which zinc selectively leaches from brass, leaving a weak, porous copper structure.
7. Is NFA 51 102 Admiralty Brass a pipe or a tube?
NF A 51-102 covers seamless round tubes for heat exchangers. Although buyers often use the term pipe, the product is generally supplied as condenser and heat exchanger tubing.
8. What is the density of Admiralty Brass?
The typical density of Admiralty Brass is approximately 8.53 g/cm³ (0.308 lb/in³).
