DIN 2391 Precision Steel Tubes

DIN 2391 Precision Steel Tubes

DIN 2391 Seamless Precision Steel Tube Supplier & Exporter in India

St30 • St35 • St37 • St44 • St45 • St52

A hydraulic cylinder only works if the piston seal meets a bore that is round, straight and the same size from end to end. Ordinary hot-finished pipe cannot promise that. Its diameter, wall and surface vary too much for anything that has to seal, slide or fit precisely. DIN 2391 tube is made for those jobs.

The tube starts as a seamless hollow and is then cold drawn or cold rolled to size. Cold finishing tightens the diameter and wall tolerances, smooths the surface and raises the strength. The final heat treatment, called the delivery condition, decides whether the tube is hard for machining or soft for bending and welding.

Amardeep Steel Centre supplies DIN 2391 tubes in St30, St35, St37, St44, St45 and St52 grades, in BK, BKW, BKS, GBK and NBK conditions. Every order ships with an EN 10204 3.1 mill test certificate. DIN 2391 has been replaced by EN 10305-1, and we supply both. 

DIN 2391 Grades We Supply

Specifications of Din 2391 Tubes 

Parameter Details

Standards

DIN 2391-1 (dimensions), DIN 2391-2 (technical delivery conditions); EN 10305-1

Manufacturing

Seamless, cold drawn or cold rolled

Delivery conditions

BK, BKW, BKS, GBK, NBK

Surface

Oiled for corrosion protection

Certification

EN 10204 3.1 MTC; third-party inspection (TUV, BV, SGS, Lloyd’s) on request

Delivery Conditions

DIN 2391 EN 10305-1 Condition Best for

BK

+C

Cold finished, hard; no heat treatment after final draw

Machined parts needing strength

BKW

+LC

Cold finished, soft; light draw after final heat treatment

Light bending and expanding

BKS

+SR

Cold finished and stress relieved

Machining and some forming

GBK

+A

Annealed in controlled atmosphere

Heavy cold forming

NBK

+N

Normalized in controlled atmosphere

Bending, flaring, welding, hydraulic lines

Chemical Composition of DIN 2391 Grades (%)

Grade C max Si max Mn P max S max

St30Si

0.10

0.30

0.55 max

0.025

0.025

St30Al

0.10

0.05

0.55 max

0.025

0.025

St35

0.17

0.35

0.40 min

0.025

0.025

St45

0.21

0.35

0.40 min

0.025

0.025

St52

0.22

0.55

1.60 max

0.025

0.025

St37 and St44 are supplied to the chemistry of their own standard, shown on the mill certificate.

Mechanical Properties of Din 2391 Tubes (minimum values)

Grade BK tensile (MPa) BK elongation (%) NBK tensile (MPa) NBK yield (MPa) NBK elongation (%)

St30Si / St30Al

430

8

290–420

215

30

St35

480

6

340–470

235

25

St45

580

5

440–570

255

21

St52

640

4

490–630

355

22

DIN 2391 to EN 10305-1 Equivalents

DIN 2391 EN 10305-1 Our EN page

St30Si / St30Al

E215

EN 10305-1 E195 precision tubes (nearest)

St35

E235

EN 10305-1 E235 tubes

St52

E355

EN 10305-1 E355 precision tubes

The US counterpart for cold-drawn mechanical tubing is ASTM A519. See all our precision tubes.

Applications of DIN 2391 Tubes

  • Hydraulic and pneumatic lines
  • Hydraulic cylinder barrels and piston rods
  • Automotive shock absorbers, drive shafts and steering parts
  • Machine-tool and mechanical-engineering components
  • Instrument tubing and equipment frames
  • Bushes, sleeves and bearing parts

Send us the grade, delivery condition, OD × wall, length and quantity for a quote.

FAQs – DIN 2391 Tubes

What is a DIN 2391 tube?

A cold-drawn or cold-rolled seamless precision steel tube made to the German standard DIN 2391, with tight tolerances on diameter and wall thickness. It is used where a tube must fit, seal or slide accurately.

What is the difference between DIN 2391 and EN 10305-1?

EN 10305-1 is the European standard that replaced DIN 2391. The grades and delivery conditions carry over, but the names change, for example St52 becomes E355 and NBK becomes +N.

What does NBK mean on a DIN 2391 tube?

NBK means the tube was normalized in a controlled atmosphere after the last cold-drawing pass. It gives soft, uniform tube that bends and welds well. Under EN 10305-1 the same condition is written +N.

Which DIN 2391 grade is used for hydraulic cylinders?

St52 in the NBK condition is the most common choice, because it combines high strength with good weldability.