V-Type Longitudinal Fin Tubes are heat exchanger tubes with V shaped channel fins resistance welded along the length of the base tube rather than around it. The folded V profile is self supporting, gives each fin more surface area than a flat longitudinal strip, and holds its shape better under vibration and thermal cycling. Fins are welded in pairs directly opposite each other along the tube axis in sets of four, eight, twelve or more depending on the required heat transfer area and the base tube diameter. V-Type Longitudinal Fin Tubes are used where straight fin channels are needed for easy cleaning, controlled fluid drainage or telescoping tube in tube construction, and where a longitudinal orientation is preferred over helical or transverse fins. Amardeep Steel Centre manufactures V-Type Longitudinal Fin Tubes in carbon steel, alloy steel, stainless steel and duplex grades for heat exchanger and process equipment fabricators.
Technical Data
Specifications of V-Type Longitudinal Fin Tubes
| Feature / Parameter | Standard Specification Range |
|---|---|
|
Product Type |
Resistance Welded V-Type Longitudinal Fin Tube |
|
Base Tube OD |
19.05 mm to 114.3 mm (3/4" to 4-1/2") |
|
Base Tube Wall Thickness |
1.65 mm to 8.0 mm (dependent on tube diameter & pressure rating) |
|
Tube Length |
Up to 18,000 mm (Custom lengths available upon request) |
|
Fin Type |
Folded V-Channel Fin (Longitudinal orientation) |
|
Fin Height |
6.0 mm to 32.0 mm |
|
Fin Thickness |
0.8 mm to 1.5 mm |
|
Number of Fins |
Multiples of 4 (e.g., 4, 8, 12, 16, 24, 36, up to 48 fins) |
|
Fin Attachment Method |
Electric Resistance Welding (ERW) / Continuous Automatic Welding |
|
Base Tube Materials |
Carbon Steel, Alloy Steel, Stainless Steel, Duplex & Super Duplex |
|
Fin Materials |
Carbon Steel, Alloy Steel, Stainless Steel (Matching base tube thermal expansion) |
|
Tube Standards |
ASTM A179, ASTM A192, ASTM A210, ASTM A213, ASTM A249, ASTM A269, ASTM A312 |
|
Operating Temperature |
Up to 650°C (depending on material grade selected) |
|
Testing & Inspection |
Dimensional, Hydrostatic, Weld Integrity, PMI, Ultrasonic / Eddy Current (on request) |
Chemical Compositions of V-Type Longitudinal Fin Tubes
| Material Grade | C (%) | Mn (%) | P (%) Max | S (%) Max | Si (%) | Cr (%) | Mo (%) | Ni (%) |
|---|---|---|---|---|---|---|---|---|
|
ASTM A179 |
0.06 – 0.18 |
0.27 – 0.63 |
0.035 |
0.035 |
0.25 Max |
— |
— |
— |
|
ASTM A192 |
0.06 – 0.18 |
0.27 – 0.63 |
0.035 |
0.035 |
0.25 Max |
— |
— |
— |
|
ASTM A210 Gr. A1 |
0.27 Max |
0.93 Max |
0.035 |
0.035 |
0.10 Min |
— |
— |
— |
|
ASTM A213 T11 |
0.05 – 0.15 |
0.30 – 0.60 |
0.025 |
0.025 |
0.50 – 1.00 |
1.00 – 1.50 |
0.44 – 0.65 |
— |
|
ASTM A213 T22 |
0.05 – 0.15 |
0.30 – 0.60 |
0.025 |
0.025 |
0.50 Max |
1.90 – 2.60 |
0.87 – 1.13 |
— |
|
ASTM A213 T91 |
0.08 – 0.12 |
0.30 – 0.60 |
0.020 |
0.010 |
0.20 – 0.50 |
8.00 – 9.50 |
0.85 – 1.05 |
0.40 Max |
|
ASTM A249 TP304 |
0.08 Max |
2.00 Max |
0.045 |
0.030 |
0.75 Max |
18.0 – 20.0 |
— |
8.00 – 11.00 |
|
ASTM A249 TP304L |
0.035 Max |
2.00 Max |
0.045 |
0.030 |
0.75 Max |
18.0 – 20.0 |
— |
8.00 – 12.00 |
|
ASTM A249 TP316 |
0.08 Max |
2.00 Max |
0.045 |
0.030 |
0.75 Max |
16.0 – 18.0 |
2.00 – 3.00 |
10.00 – 14.00 |
|
ASTM A249 TP316L |
0.035 Max |
2.00 Max |
0.045 |
0.030 |
0.75 Max |
16.0 – 18.0 |
2.00 – 3.00 |
10.00 – 14.00 |
V-Type Longitudinal Fin Tubes Mechanical Properties
| Material Grade | Tensile Strength (MPa) Min | Yield Strength (MPa) Min | Elongation (%) Min | Hardness (Max) |
|---|---|---|---|---|
|
ASTM A179 |
325 |
180 |
35 |
72 HRB |
|
ASTM A192 |
325 |
180 |
35 |
72 HRB |
|
ASTM A210 Gr. A1 |
415 |
255 |
30 |
79 HRB |
|
ASTM A213 T11 |
415 |
205 |
30 |
163 HB |
|
ASTM A213 T22 |
415 |
205 |
30 |
163 HB |
|
ASTM A213 T91 |
585 |
415 |
20 |
250 HB |
|
ASTM A249 TP304 |
515 |
205 |
35 |
92 HRB |
Equivalent Grades of V-Type Longitudinal Fin Tubes
| ASTM / ASME Standard | EN Standard | BS Standard | DIN Standard | JIS Standard |
|---|---|---|---|---|
|
ASTM A179 |
EN 10216-2 P235GH |
BS 3059 Part 1 320 |
DIN 17175 ST35.8 |
JIS G3461 STB35 |
|
ASTM A192 |
EN 10216-2 P265GH |
BS 3059 Part 2 360 |
DIN 17175 ST45.8 |
JIS G3461 STB42 |
|
ASTM A210 Gr. A1 |
EN 10216-2 P265GH |
BS 3059 Part 2 440 |
DIN 17175 19Mn5 |
JIS G3461 STB52 |
|
ASTM A213 T11 |
EN 10216-2 13CrMo4-5 |
BS 3604 620-460 |
DIN 17175 15Mo3 |
JIS G3462 STBA23 |
|
ASTM A213 T22 |
EN 10216-2 10CrMo9-10 |
BS 3604 622 |
DIN 17175 10CrMo910 |
JIS G3462 STBA24 |
|
ASTM A213 T91 |
EN 10216-2 X10CrMoVNb9-1 |
— |
DIN 17175 X10CrMoVNb91 |
JIS G3462 STBA28 |
|
ASTM A249 TP304 |
EN 10217-7 X5CrNi18-10 |
BS 3605 304S31 |
DIN 17457 1.4301 |
JIS G3463 SUS304TB |
|
ASTM A249 TP316 |
EN 10217-7 X5CrNiMo17-12-2 |
BS 3605 316S31 |
DIN 17457 1.4401 |
JIS G3463 SUS316TB |
Working Pressure and Operating Temperature Limits of V-Type Longitudinal Fin Tubes
| Base Tube Material Grade | Max Recommended Operating Temp (°C) | Pressure Capability Rating |
|---|---|---|
|
Carbon Steel (A179 / A192 / A210) |
Up to 425°C |
Moderate to High Pressure (per ASME Code limits) |
|
Alloy Steel (A210 T11 / T22) |
Up to 550°C |
High Pressure / High Temperature Boiler Applications |
|
Alloy Steel (A213 T91) |
Up to 650°C |
Very High Pressure / Elevated Thermal Cycling |
|
Stainless Steel (TP304 / TP304L) |
Up to 600°C |
High Pressure / Corrosive Process Environments |
|
Stainless Steel (TP316 / TP316L) |
Up to 650°C |
High Pressure / Acidic & Chloride-Bearing Media |
Dimensions Chart of V-Type Longitudinal Fin Tubes
| Base Tube OD (mm) | Wall Thickness (mm) | Fin Height (mm) | Fin Thickness (mm) | Number of Fins | Approx. Finned OD (mm) |
|---|---|---|---|---|---|
|
19.05 |
1.65 / 2.11 |
10.0 |
0.8 / 1.0 |
8 / 12 |
39.05 |
|
25.40 |
2.11 / 2.77 |
12.7 |
1.0 / 1.2 |
12 / 16 |
50.80 |
|
31.75 |
2.77 / 3.20 |
12.7 |
1.0 / 1.2 |
16 / 20 |
57.15 |
|
38.10 |
2.77 / 3.68 |
15.8 |
1.0 / 1.2 |
16 / 24 |
69.70 |
|
50.80 |
3.20 / 4.50 |
19.0 |
1.2 / 1.5 |
24 / 32 |
88.80 |
|
60.32 |
3.68 / 5.00 |
19.0 |
1.2 / 1.5 |
24 / 36 |
98.32 |
|
76.20 |
4.50 / 6.00 |
25.4 |
1.2 / 1.5 |
32 / 48 |
127.00 |
Need V-Type Longitudinal Fin Tubes in a specific fin count or base tube grade? Share your heat exchanger drawing and we will confirm feasibility and lead time within 24 hours.
Request a QuoteApplications and Industrial Uses of V-Type Longitudinal Fin Tubes
- Shell-and-Tube Heat Exchangers
- Double-Pipe Heat Exchangers
- Oil & Gas Process Heaters
- Petrochemical Process Heat Exchangers
- Chemical Processing Heat Exchangers
- Boiler Superheaters and Reheaters
- Waste Heat Recovery Systems
- Power Plant Heat Transfer Systems
Frequently Asked Questions
What are V-Type Longitudinal Fin Tubes?
V-Type Longitudinal Fin Tubes are heat transfer tubes fitted with longitudinal fins that run continuously along the tube length, with a V-shaped fin profile.
How do V-Type Longitudinal Fin Tubes improve heat transfer?
They increase the external surface area of the tube, allowing more heat to transfer between the tube wall and surrounding fluid.
Where are V-Type Longitudinal Fin Tubes commonly used?
They are commonly used in heat exchangers, process heaters, oil and gas equipment, petrochemical plants, and waste heat recovery systems.
What is the difference between V-Type and standard Longitudinal Fin Tubes?
V-Type Longitudinal Fin Tubes have a specific V-shaped fin profile, while standard longitudinal fin tubes can use different fin profiles and attachment designs.
Are V-Type Longitudinal Fin Tubes suitable for heat exchangers?
Yes, they are suitable for various shell-and-tube and other heat exchanger applications where increased heat transfer surface area is required.
Can V-Type Longitudinal Fin Tubes be used in high-temperature applications?
Yes, they can be used in high-temperature applications when the selected tube and fin materials are suitable for the operating temperature.
Can V-Type Longitudinal Fin Tubes be supplied in custom sizes?
Yes, they can be manufactured in custom tube dimensions, fin heights, fin thicknesses, fin densities, and lengths according to project requirements.
