ASTM A213 T12 Alloy Steel Seamless Tube

ASTM A213 Grade T12 Alloy Steel Seamless Tubes, Alloy Steel Gr. T12 Seamless Tubes Manufacturer & Exporter.

Alloy Steel Grade T12 Seamless EN 10216-2 Tubes, GOST 550-75, K11562 Seamless Tubes Suppliers in India.

ASTM A213 T11 Alloy Steel Seamless Tube

Amardeep Steel is one of the leading Manufacturers, Supplier and Exporters of high quality ASTM A213 T12 Alloy Steel Seamless Tube. these tubes are available in different size, grades, shapes & specification as per the clients requirements. These different requirements provide higher creep-rupture strength than normally achievable in similar grades without these different requirements. These tube are used in various application industry like Petroleum,chemical,power, gas, water, metallurgy, shipbuilding, construction etc.

Specification :

Size (Seamless) : 6.35mm o.d to 101.60mm o.d
Standards : ASTM A213, ASME SA213
Equivalent Standards : EN 10216-2, ASTM A335, GOST 550-75
Material : T12, K11562
Equivalent Material : 13CrMo44, 1.7335, 13CrMo4-5, P12, 14CrMo3, 620-440, TU 13 CD 4-04
Type : Seamless
Specialized in : Large Diameter Size
Outer Dimensions : 6-2500mm; WT:1-200mm
Wall Thickness : Schedule 3mm to 15mm.
Length : max 1~12m
Schedule : STD, SCH40, SCH80
Form : Round, Square, Rectangular, Hydraulic Etc.
Length : Single Random, Double Random & Cut Length.
Tubing End : Plain End, Beveled End, Treaded.

Chemical Compositions :

 

C, % Mn, % P, % S, % Si, % Cr, % Mo, %
0.15 max 0.30-0.60 0.025 max 0.025 max 0.50-1.00 1.00-1.50 0.44-0.65

Mechanical Properties :

 

Tensile Strength , MPa Yield Strength, MPa Elongation, % Hardness, HB
415 min 205 min 30 min 179 max

Outside Diameter & Tolerance :

 

Hot rolled Outside Diameter, mm Tolerance, mm
OD≤101.6 +0.4/-0.8
101.6<OD≤190.5 +0.4/-1.2
190.5<OD≤228.6 +0.4/-1.6
Cold Drawn Outside Diameter, mm Tolerance, mm
OD<25.4 ±0.10
25.4≤OD≤38.1 ±0.15
38.1<OD<50.8 ±0.20
50.8≤OD<63.5 ±0.25
63.5≤OD<76.2 ±0.30
76.2≤OD≤101.6 ±0.38
101.6<OD≤190.5 +0.38/-0.64
190.5<OD≤228.6 +0.38/-1.14

Wall thickness & Tolerance :

 

Hot rolled Outside Diameter, mm Tolerance, %
OD≤101.6, WT≤2.4 +40/-0
OD≤101.6, 2.4<WT≤3.8 +35/-0
OD≤101.6, 3.8<WT≤4.6 +33/-0
OD≤101.6, WT>4.6 +28/-0
OD>101.6, 2.4<WT≤3.8 +35/-0
OD>101.6, 3.8<WT≤4.6 +33/-0
OD>101.6, WT>4.6 +28/-0
Cold Drawn Outside Diameter, mm Tolerance, %
OD≤38.1 +20/-0
OD>38.1 +22/-0

Length: 5800mm; 6000mm; 6096mm; 7315mm; 11800mm; 12000mm; and so on.
Max length: 16000mm, also U bending can be offered.

Our Products

Our Main Market